Remote WebUI Access

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > FAQ > Remote Access > Remote WebUI Access

The router can be accessed remotely via any interface as it is listening for connections on all IPs when WebUI access is enabled. However, due to the firewall restrictions, access via interfaces other than LAN requires additional configuration.

Remote access[edit | edit source]

The only mandatory prerequisite for remote access is an active Internet connection. If that is met there a few independent options for remote access described below.

With public IP[edit | edit source]

The simplest way to access the device remotely is via its public IP address (if it has one).

WAN Interface[edit | edit source]

If a WAN interface on your device has a public IP address, you can reach the WebUI enabling remote HTTP access in the System → Administration → Access Control page.

Networking rutos faq remote webui access v1.png

After that you should be able to access your device's WebUI by simply entering its public IP address into the URL bar of your browser.

Networking rutos faq remote webui access browser v1.png

Dynamic DNS[edit | edit source]

If a WAN interface on your device has a dynamic public IP address (i.e., it has a public IP that changes), you can configure a public hostname for it using a third-party Dynamic DNS (DDNS) service in the Services → Dynamic DNS page. Dynamic DNS periodically updates your device's IP address at the third-party service making the device accessible via the same hostname even if the IP address changes.

Visit your device's Dynamic DNS manual page to learn more on Dynamic DNS configuration.

Without public IP[edit | edit source]

Since public IPs are not at everyone's disposal, this section describes the remote acccess methods that can be utilized without the use of a public IP address.

RMS[edit | edit source]

Teltonika_Networks Remote Management System (RMS) provides a way to access your devices remotely without a public IP address or a VPN. Create an RMS account, add your devices and click the WebUI RMS WebUI button.png icon next to a device in order to generate an access link.

How to reach a routers WebUI from RMS.gif

VPN[edit | edit source]

Teltonika-Networks devices support multiple Virtual Private Network (VPN) protocols. With the right configuration, other devices from the same VPN can access your device's WebUI.

Visit your device's VPN manual page to learn more on VPN configuration.