400
edits
Changes
VXLAN Configuration Example Lukas Demo (view source)
Revision as of 13:05, 20 September 2024
, 20 September→Configuring VXLAN interfaces
# Click [[File:Save & Apply.png|90px]] twice
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan over wired vxlan settings rut1.png|border|class=tlt-border]]
[[File:Vxlan over wired vxlan settings rut1.png|border|class=tlt-border]]
===Configuring VXLAN interfaces===
----
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling layer 3 communication between them
====RUT2 VXLAN configuration====
Navigate to the '''Network > WAN'''
#In '''Add new device''' section select Type '''VXLAN'''
#Press [[File:Add Button.png|50px]]
[[File:Vxlan over wired vxlan settings add.png|border|class=tlt-border]]
#<li value="3">Enter name of the new VXLAN interface
# Enter the Remote address corresponding to RUT2 wired WAN interface IP address
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan over wired vxlan settings rut2.jpg|border|class=tlt-border]]
==Configuring VXLAN over 2 Public IP addresses==
==Configuring VXLAN over 2 Public IP addresses==
