40
edits
Changes
Draft:802.11r WiFi roaming configuration example (view source)
Revision as of 04:17, 26 September 2024
, Yesterday at 04:17no edit summary
==Introduction==
This article provides a basic configuration example of WiFi roaming.
==Prerequisites==
* Main gateway with WAN access (Any RUTOS router. RUTXR1 is used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUT955 (Router 2) are used in this example)
* All devices on <b><i>R_00.02.05.1</i></b> or newer firmware. Legacy firmware is not supported.
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
