Changes

no edit summary
Line 1: Line 1: −
In '''Modem''' serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by the device connected via serial interface with an ATD command: '''ATD <host>:<port>'''. If Direct connect settings are specified, the connection to the server is always active. Data mode can be entered by issuing the ATD command. Incoming connections are indicated by sending a RING to the serial interface.
+
In <b>Modem</b> serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by a device connected via the RS232 serial interface with an ATD command: <b>ATD <HOST>:<PORT></b>. If Direct connect settings are specified, the connection to the server is always active. Data mode can be entered by issuing the ATD command. Incoming connections are indicated by sending a RING to the serial interface.
    
The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields:
 
The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields:

Navigation menu