31,703
edits
Changes
no edit summary
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles UPnP ON or OFF</td>
<td>Toggles UPnP ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Use secure mode</td>
<td>Use secure mode</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>yes | no; Default: '''yes'''</td>
<td>Toggles Secure mode ON or OFF</td>
<td>Toggles Secure mode ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Use UPnP port mapping</td>
<td>Use UPnP port mapping</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>yes | no; Default: '''yes'''</td>
<td>Toggles UPnP port napping ON or OFF</td>
<td>Toggles UPnP port napping ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Use NAT-PMP port mapping</td>
<td>Use NAT-PMP port mapping</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>yes | no; Default: '''yes'''</td>
<td>Toggles NAT-PMP port mapping ON or OFF</td>
<td>Toggles NAT-PMP port mapping ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Device UUID</td>
<td>Device UUID</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>yes | no; Default: '''yes'''</td>
<td>Specify Universal unique ID of the device</td>
<td>Specify Universal unique ID of the device</td>
</tr>
</tr>
<tr>
<tr>
<td>Ecternal ports</td>
<td>Ecternal ports</td>
<td>integer [0..65535]] {{!}} range of integers [0-65535]; Default: '''1024-65535'''</td>
<td>integer [0..65535]] | range of integers [0-65535]; Default: '''1024-65535'''</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal ports</td>
<td>Internal ports</td>
<td>integer [0..65535]] {{!}} range of integers [0-655355]; Default: '''1024-65535'''</td>
<td>integer [0..65535]] | range of integers [0-655355]; Default: '''1024-65535'''</td>
<td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
<td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>allow {{!}} deny; Default: '''allow'''</td>
<td>allow | deny; Default: '''allow'''</td>
<td>Allows or forbids the UPnP service to open the specified port</td>
<td>Allows or forbids the UPnP service to open the specified port</td>
</tr>
</tr>
</table>
</table>
[[Category:RUT900 WebUI]]
