TRB142 CLI

From Teltonika Networks Wiki
Main Page > TRB Gateways > TRB142 > TRB142 Manual > TRB142 WebUI > TRB142 System section > TRB142 CLI

The information in this page is updated in accordance with firmware version TRB1_R_00.07.04.3.


Summary

The CLI or Command-line interface functionality allows you to enter and execute Linux commands within the device. This manual page provides an overview of the CLI page in TRB142 devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking trb1 manual webui basic advanced mode.gif

CLI

The RutOS CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:

  • Username: root
  • Password: device's password

If the login was successful, you should be greeted with a window similar to this:

Networking rutx11 manual cli v1.png