TRB142 User Scripts

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > TRB Gateways > TRB142 > TRB142 Manual > TRB142 WebUI > TRB142 System section > TRB142 User Scripts

The information in this page is updated in accordance with firmware version TRB14X_R_00.02.04.1.

Summary[edit | edit source]

The User Scripts function allows users to write their own shell scripts that will be executed during the device's booting process. This page is an overview of the User Scripts function in TRB142 devices.

Startup Script[edit | edit source]

The Startup Script section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's boot cycle. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the Startup Script management section:

Networking trb manual user scripts v1.png