From Teltonika Networks Wiki
Main Page > TRB Gateways > TRB500 > TRB500 Manual > TRB500 WebUI > TRB500 System section > TRB500 CLI
The information in this page is updated in accordance with firmware version TRB5_R_00.07.04.3.
The CLI or Command-line interface functionality allows you to enter and execute Linux commands within the device. This manual page provides an overview of the CLI page in TRB500 devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
The RutOS CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:
- Username: root
- Password: device's password
If the login was successful, you should be greeted with a window similar to this: