Teltonika Networks Routers Families
Introduction
This page provides a general overview of Teltonika Networks router families, outlining their key characteristics, form factors, and intended use cases. For full technical specifications of a specific model, please refer to the corresponding family page linked in each section.
RUT1 Series
RUT1 – compact industrial routers without mobile connection. Routers designed for advanced industrial solutions, including but not limited to remote equipment monitoring & management, WiFi & Ethernet connectivity, automotive and many others.
- Dimensions (W x H x D): 113.10 x 25 x 68.6 mm
- 2x 10/100 Ethernet ports
- No cellular capabilities
- Integrated DIN rail bracket
- Wi-Fi 4 for additional connectivity
- Can be powered via PoE passive mode
- Some models have RS-232
- Some models have RS-485
- Some models have RS-232 and RS-485
Full list of RUT1 series devices can be found here: RUT Routers
RUT2 Series
RUT2 – small and compact cellular routers designed for advanced industrial solutions, including but not limited to remote equipment monitoring & management, WiFi & Ethernet connectivity, automation serial communication, automotive and many others.
- Dimensions (W x H x D): 83 x 25 x 74 or 83 mm
- 2x 10/100 Ethernet ports
- Wi-Fi 4
- LTE Cat 4, LTE Cat 6, or 5G RedCap modems, depending on model
- Depending on the model: RS-232 and RS-485, or RS-232 only
- Integrated DIN rail bracket
- Flash storage varies between specific models
- Can be powered via PoE passive mode; some models support PoE active mode
- 1x Digital Input and 1x Digital Output on a 4-pin power connector
- Some models have 2 SIM slots, allowing SIM switching
- Some models support eSIM
- Some models include an SD card slot
- Some models combine native CAN FD hardware and GNSS
Full list of RUT2 series devices can be found here: RUT Routers
RUT3 Series
RUT3 – compact cellular routers designed for advanced industrial solutions, including but not limited to remote equipment monitoring & management, WiFi & Ethernet connectivity, automation serial communication, automotive and many others.
- Dimensions (W x H x D): 100 x 30 x 85 mm
- LTE Cat 6 and no-modem variants available
- USB port
- Integrated DIN rail bracket
- Some models have 1x Digital Input and 1x Digital Output on a 4-pin power connector
- Some models have 2x, others 5x, 10/100 Mbps Ethernet ports
- Some models have Wi-Fi 4
Full list of RUT3 series devices can be found here: RUT Routers
RUT9 Series
RUT9 – versatile industrial cellular routers designed for advanced industrial solutions, including but not limited to remote equipment monitoring & management, WiFi & Ethernet connectivity, automation serial communication, automotive and many others.
- 4x 10/100 Ethernet ports
- Wi-Fi 4
- Integrated DIN rail bracket
- LTE Cat 4 or 5G RedCap modems, depending on model
- 1x Digital Input and 1x Digital Output on a 4-pin power connector
- Some models have 2 SIM slots, allowing SIM switching
- Some models support eSIM
- Some models include RS-232 and RS-485
- Some models include USB, GNSS, and an SD card slot
- Some models support PoE passive mode; some support or provide PoE active mode
- Some models have an I/O 2x5 pin block
Full list of RUT9 series devices can be found here: RUT Routers
RUTX Series
RUTX is a series of cellular and Ethernet routers designed for advanced industrial solutions, including remote equipment monitoring & management, Wi-Fi & Ethernet connectivity, Bluetooth sensor data monitoring, automotive applications, and more.
- Quad-core 717 MHz processor
- 256 MB RAM
- LTE Cat 6, LTE Cat 12, or 5G modems, or no modem at all, depending on model
- 2 SIM card slots
- Integrated DIN rail bracket
- Some models feature Wi-Fi 5
- Some models have 4x, others 5x, 1 Gbps Ethernet ports
- Some models include Bluetooth
- Some models include USB
- Some models include GNSS
- Some models support eSIM
- Some models include Input/Output
Full list of RUTX series devices can be found here: RUTX Routers
RUTM Series
RUTM is a series of cellular and Ethernet routers designed for advanced industrial solutions, including remote equipment monitoring & management, Wi-Fi & Ethernet connectivity, automotive applications, and more.
- Dual-core 880 MHz processor
- 256 MB RAM
- 2–5 Gigabit Ethernet ports (some models have 2x, others 4x, others 5x, 1 Gbps Ethernet ports)
- All models can be powered via PoE passive mode; some support PoE active mode or provide active PoE output
- USB
- 2 SIM card slots
- LTE Cat 6, LTE Cat 12, or 5G modems, or no modem at all, depending on model
- Integrated DIN rail bracket
- Some models feature Wi-Fi 5
- Some models include GNSS
- Some models have an I/O 2x8 pin block
- Some models support eSIM
- Some models include RS-232 and RS-485
Full list of RUTM series devices can be found here: RUTM Routers
ATRM Series
ATRM is built for transportation, featuring M12 Ethernet ports and an M12 power input for durable, secure connections. Certified to EN 45545-2 and EN 50155 standards, engineered to meet the rigorous safety and reliability requirements of railway systems, while also being a strong fit for other demanding transportation environments.
- ATRM is built on the RUTM series platform
- Dual-core 880 MHz processor
- 256 MB RAM
- Wi-Fi 5
- 5G, 4G Cat19/18, 3G
- GNSS
- Integrated flat surface mounting
- 4 × M12 X-coded Gigabit Ethernet ports
- 1 × M12 A-coded power input
- 2 SIM card slots
- SD card
- USB
- 2x Inputs for Ignition Detection and Low Battery
Full list of ATRM series devices can be found here: ATRM Routers
RUTC Series
RUTC is a series of cellular and Ethernet routers designed for advanced industrial solutions, including but not limited to remote equipment monitoring & management, WiFi & Ethernet connectivity, automotive and many others.
- 1.3 GHz CPU
- 1 GB RAM (some models have a 512 MB version available)
- Wi-Fi 6
- 4–5 Gigabit Ethernet ports
- USB
- LTE Cat 6, or 5G modems
- Supports higher-load applications, including Docker (see: Docker on RUTC)
- 2 SIM slots
- 2 Input/Outputs
- Integrated DIN rail bracket
- Some models have GNSS
- Some models have dual modems
Full list of RUTC series devices can be found here: RUTC Routers
Altos (CAP) Series
Altos is a series of 5G Wi-Fi 7 routers, delivering broadband to homes, small offices, and other Fixed Wireless Access deployments.
- 1 GB RAM
- 8 GB flash storage
- Wi-Fi 7
- 2x Ethernet ports (2.5 Gbps WAN, 1 Gbps LAN)
- 1x RJ11 telephone port
- 1 SIM slot
- 5G connectivity
- USB
Full list of Altos series devices can be found here: Altos Routers
OTD Series
OTD is a series of outdoor routers designed for outdoor usage, with an Ingress Protection (IP) rating against solids and water.
- 580 MHz or 880 MHz CPU
- 128 MB or 256 MB RAM
- Can be powered via PoE active mode
- LTE Cat 4, or 5G modems
- 3x Ethernet 100 Mbps or 1 Gbps ports
- 2 SIM slots
- Some models support eSIM
- Some models have Wi-Fi 4
Full list of OTD series devices can be found here: OTD Routers