Template:Networking rutos manual modbus modbus tcp set parameters table
Set Parameters
The Modbus daemon can also set some device parameters. These parameters and explanations on how to use them are described in the table below:
| value to set | register address | register value | description |
|---|---|---|---|
| Reboot | 206 | 1 | Reboots the router |
| Switch PIN 3 state | 324 | 1|0 | Toggles PIN 3 ON or OFF, when output is selected |
| Switch PIN 4 state | 325 | 1|0 | Toggles PIN 4 ON or OFF, when output is selected |