Template:Networking rut2xx manual modbus modbus tcp set parameters table
Revision as of 10:13, 28 December 2021 by Gytispieze (talk | contribs)
| value to set | register address | register number | register value | description |
|---|---|---|---|---|
| Hostname | 7 | 8 | Hostname | Changes hostname |
| Device name | 71 | 72 | Device name | Changes device name |
| Switch WiFi (ON/OFF*) | 203 | 204 | 1 | 0 | Turns WiFi ON or OFF |
| Switch mobile data connection (ON/OFF*) | 204 | 205 | 1 | 0 | Turns mobile data connection ON or OFF |
| Reboot | 206 | 207 | 1 | Reboots the router |
| Change APN | 207 | 208 | APN code | Changes APN. The number of input registers may vary depending on the length of the APN, but the very first byte of the set APN command has to be specified as 1 |
| Switch PIN4 state (ON/OFF*) | 325 | 326 | 1 | 0 | Turns PIN4 state ON or OFF |