Auto APN

From Teltonika Networks Wiki
Main Page > FAQ > Control & Configuration > Auto APN

How does Auto APN work

Teltonika devices have an Auto APN feature that allows the device to analyze the SIM card. And automatically select the correct APN information from a pre-loaded database. This function reduces the time required to configure the device in different locations with different providers.

How to configure Auto APN

RUTOS WebUI


Instructions:

  1. Log into your device's WebUI.
  2. Navigate to Network → WAN (Basic WebUI mode) or Network → Interfaces (Advanced WebUI mode).
  3. Press Edit on the mobile interface.
Networking faq autoapn configuration rutos 1.png   4. Untoggle / Toggle Auto APN. Networking faq autoapn configuration rutos 2.png

Legacy WebUI


Auto APN is enabled by default. But if you have just inserted the SIM card you might need to restart (RUT9XX/RUT2XX) routers modem first (Status/Mobile/Mobile Information).




Instructions:

  1. Log into your device's WebUI.
  2. Navigate to NetworkMobile.
  3. Uncheck / Check Auto next to APN.

Networking faq autoapn configuration v1.png

How to configure custom APN

RUTOS WebUI


  1. Log into your device's WebUI.
  2. Navigate to Network → WAN (Basic WebUI mode) or Network → Interfaces (Advanced WebUI mode).
  3. Press Edit on the mobile interface.
Networking faq autoapn configuration rutos 1.png   4. Untoggle Auto APN. Networking faq autoapn configuration rutos 2.png   5. Enter desired APN.

Custom APN.png

Legacy WebUI


Instructions:

  1. Log into your device's WebUI.
  2. Navigate to NetworkMobile.
  3. Uncheck Auto next to APN.
Auto APN Legacy.png

  5. Enter desired APN.

Custom APN legacy.png