TCR100 Remote Monitoring & Administration

From Teltonika Networks Wiki
Revision as of 09:28, 4 August 2021 by BenasB (talk | contribs) (Created page with "{{Template: Networking_device_manual_remote_management | name = TCR100 | series = TCR1 | sms = 1 | json = 0 | vpn = 1 | snmp = 0 | modbus = 0 | mqtt = 1 | tr069...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > TCR Routers > TCR100 > TCR100 Manual > TCR100 Remote Monitoring & Administration

TCR100 supports multiple monitoring and administration possibilities.

Remote control options

The TCR100 router supports the following remote control capabilities:

Remote control method Can get parameters Can set parameters
RMS Check.png Check.png
SSH Check.png Check.png
HTTP Check.png Check.png
SMS Check.png Check.png
VPN Check.png Check.png
MQTT Check.png Uncheck.png

RMS


The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the SystemAdministrationRMS page.

Public IP


If you're using a SIM card that has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access


Remote HTTP access can be set up via the SystemAdministrationAccess Control page.

SSH access


Remote SSH access can be set up via the SystemAdministrationAccess Control page.

SMS


The router can be controlled via SMS messages using SMS utilities rules. SMS can be configured via the ServicesSMS UtilitiesSMS Rules page.

VPN


Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by TCR100, visit the VPN manual page.


MQTT


MQTT (MQ Telemetry Transport or Message Queue Telemetry Transport) is a publish-subscribe-based "lightweight" messaging protocol for use on top of the TCP/IP protocol. For more information on MQTT in TCR100, visit the MQTT manual page