How to set up a USB printer (Windows, RUTXR1)
From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTXR1 > RUTXR1 Configuration Examples > How to set up a USB printer (Windows, RUTXR1)
Introduction[edit | edit source]
This article provides step-by-step instructions on how to set up and utilize a printer connected to the USB port of a RUTXR1 router.
The information in this page is updated in accordance with the RUTX_R_00.02.03 firmware version.
Prerequisites[edit | edit source]
You will need:
- an RUTX router running FW version RUTX_R_00.02.3 or newer (FW downloads);
- a computer running Windows 10 OS;
- a USB A to B printer cable.
Instructions[edit | edit source]
- Connect the printer to your router's USB port. Connect your computer to the router via Ethernet cable or wirelessly.
- Login to the router's WebUI, go the Services → USB Tools → Printer Server page and configure the printer settings:
Most importantly - Enable the printer.
- Open the Printers & scanners page on your PC. Click the Add a printer or scanner button and wait until the note "The printer that I want isn't listed" appears; click it:
- In the following window choose TCP/IP address option and click Next.
- Select Device type: TCP/IP Device, enter the router's LAN IP address and port name. For example:
- In the next window, select Device Type: Standard, find and select your printer's manufacturer from the dropdown:
- Select your printer from the list:
- Next, the PC will look printer drivers. If the drivers for your printer have been installed prior, you can choose the option to replace them or use the currently installed drivers.
- In the next two windows you will be asked you to enter a custom name for the printer and set up sharing rights. The very last window will provide the option to print a test page in order to find out if the printer was set up successfully. If you choose it and see a test page coming out of your printer - congratulations, you have just successfully set up your printer!