View source for LAN as WAN

===Using Static IP===
----
<font size="-1"><u><i>If you're using DHCP, jump to the [[#Testing the configuration|next section of this guide]]</i></u></font>
----
Use the arrow keys to navigate the file and find the <b><i>config interface 'lan_wan'</i></b> section. Add these four options to the configuration: 

<ul>
    <li><i>option gateway '192.168.10.1'</i></li>
    <li><i>option dns '8.8.8.8'</i></li>
    <li><i>option backup '1'</i></li>
    <li><i>option metric '10'</i><br>[[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_5_v1.png]]</li>
    <li>Press the <b>Escape (E<small>SC</small>)</b> button on your keyboard; type <b><i>:wq</i></b> and press <b>Enter</b> to close the editor and save the changes.</li>
    <li>Restart the network service on the router in order to apply the changes by executing this command:<br><pre>/etc/init.d/network restart</pre></li>
</ul>
----
<ul>
    <li>You can exit PuTTY after this return to the WebUI; navigate to the <b>Network → Firewall → General Settings</b> page.</li>
    <li>Scroll down to the <i>Zone Forwarding</i> section, find <i>source zone: <u>lan_wan</u></i>.</li>
    <li>Change <i>Default forwarding action</li> from <b>reject</b> to <b>accept</b>, tick the <b>Masquerading</b> checkbox and save the changes.<br>[[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_6_v1.png|border|class=tlt-border]]</li>
</ul>