View source for RMS Remote SSH

__TOC__
==Summary==
The '''Remote SSH''' section located in the '''[[RMS_Connect|RMS Connect]]''' menu and it allow using SSH protocol to connect directly to devices that are plugged into Teltonika Networks equipment. 

==Remote SSH video guide==
Below you will find a tutorial where you will learn how to use RMS Connect to set up a Remote SSH connection on your end device. 

<youtube>OGXS5-StyCM</youtube>

<br>
==Add new remote==
To add a new remote device go to Left sidebar panel ('''RMS Connect''' → '''Remote SSH''') and click on '''Remote SSH'''.

Move your mouse pointer to the Remote menu and select '''Add new remote''' ('''Remote''' → '''Add new remote''').

[[File:Rms manual left rms ssh v1.png]] 

===Auto Scan===
----

* While on the Auto Scan tab, select a device from the drop-down list.

* The list of the accessible ports will be displayed.
* Select the IP, then the SSH port, and click Add. (Optionally you can change the name).

<br>

You will get a success message.

<br>

A newly created Remote SSH connection will appear on the screen.

===Manual===
----

# If the Manual tab is selected you must know all the connection details.
# Begin by entering the name for the SSH connection. 
# Enter the IP address for your end device. 
# Then set the SSH port, the default one is 22. 
# Finally, pick your RMS-connected device and to finish, click the ADD button. 
# We now have manually created a Remote SSH connection.

==Connecting to Remote SSH==

# To connect, click on the name of the connection or anywhere on the general highlighted area. 
# Clicking the connection name will open the direct link generation window. 
# And clicking on the general highlighted area will open a window with the complete SSH connection information. 
# You can specify the preferred connection duration. RMS will create a sharable connection link.
# Enter the authentication information. 
# Connected. You can perform various operations with the files and folders.

[[Category:RMS Connect]]