Difference between revisions of "RMS Remote Telnet"

From Teltonika Networks Wiki
Line 3: Line 3:
 
The '''Remote Telnet''' section located in the '''[[RMS_Connect|RMS Connect]]''' menu and it allows using Telnet protocol to connect directly to devices that are plugged into Teltonika Networks equipment.  
 
The '''Remote Telnet''' section located in the '''[[RMS_Connect|RMS Connect]]''' menu and it allows using Telnet protocol to connect directly to devices that are plugged into Teltonika Networks equipment.  
  
===Video tutorial===
+
==Video tutorial==
  
 
Below you will find a tutorial where you will learn how to use RMS Connect to set up a Remote Telnet connection on your end device.  
 
Below you will find a tutorial where you will learn how to use RMS Connect to set up a Remote Telnet connection on your end device.  

Revision as of 13:44, 27 September 2021

Main Page > IoT Platforms > RMS > RMS Manual > RMS Connect > RMS Remote Telnet

Summary

The Remote Telnet section located in the RMS Connect menu and it allows using Telnet protocol to connect directly to devices that are plugged into Teltonika Networks equipment.

Video tutorial

Below you will find a tutorial where you will learn how to use RMS Connect to set up a Remote Telnet connection on your end device.

Add new remote

To add a new remote device go to Left sidebar panel (RMS ConnectRemote Telnet) and click on Remote Telnet.

Move your mouse pointer to the Remote menu and select Add new remote (RemoteAdd new remote).

Rms manual left rms telnet v1.png


Auto Scan


  • While on the Auto Scan tab, select a device from the drop-down list.
  • The list of the accessible ports will be displayed.
  • Select the IP, then the Telnet port, and click Add. (Optionally you can change the name).


Rms manual sftp auto select port v1.gif


You will get a success message.


Rms manual connect lan device success v1.png


A newly created Remote Tlenet connection will appear on the screen.

Rms manual sftp remote created v1.png

Manual


  1. If the Manual tab is selected you must know all the connection details.
  2. Begin by entering the name for the Telnet connection.
  3. Enter the IP address for your end device.
  4. Then set the Telnet port, the default one is 22.
  5. Finally, pick your RMS-connected device and to finish, click the ADD button.
  6. We now have manually created a Remote Telnet connection.

Connecting to Remote Telent

  1. To connect, click on the name of the connection or anywhere on the general highlighted area.
  2. Clicking the connection name open will the direct link generation window.
  3. And clicking on the general highlighted area will open a window with the complete Telnet connection information.
  4. You can specify the preferred connection duration. RMS will create a sharable connection link.
  5. Enter the authentication information.
  6. Connected. You can perform various operations with the files and folders.