RUT240 Mobile

From Teltonika Networks Wiki
Revision as of 15:56, 10 November 2017 by Dziugas (talk | contribs)

Main Page > RUT Routers > RUT240 > RUT240 Manual > RUT240 WebUI > RUT240 Network section > RUT240 Mobile

Summary

The Mobile section is used to configure SIM card parameters, mobile data limits and network operators. This chapter is an overview of RUT240 routers' Mobile section.

General

The General Tab is used to configure SIM card parameters such as Service mode, Connection type, APN and more much more.

Mobile Configuration


Network mobile general rut240.PNG

Field name Value Description
Connection type QMI | NCM | NDIS | PPP; Default: QMI Defines how the router's modem will establish a connection to the ISP (Internet Service Provider)

PPP uses a dialling number to establish a data connection

QMI does not use dialling or the PPP protocol to establish data connection and it is usually faster than PPP mode

NOTE: PPP connection type exists on all RUT devices, but QMI does not. If you have a RUT device with a Telit modem, QMI will be replaced by NCM. If your RUT device contains a Huawei modem, you will see NDIS instead of QMI. QMI connection type is available on RUT devices that use a Quectel modem (which is the standard modem for most RUT devices)

Mode NAT | Passthrough* | Bridge; Default: NAT NAT mode enables network address translation on the router

Bridge mode bridges the LTE data connection with LAN. In this mode the router does not have an internet connection as the ISP provides an IP address directly to the end device (e.g., computer). Using Bridge mode will disable most of the router’s capabilities and you will only be able to access your router's settings with a static IP address.

Passthrough mode works in a similar fashion to Bridge mode, except in passthrough mode the router will have an internet connection and be reachable

APN string; Default: " " An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network
PIN number string; Default: " " A personal identification number is a numeric password used to authenticate a user to a system
Dialing number string; Default: " " A Dialling number is used to establish a mobile PPP connection
MTU integer [0..1500]; Default: 1500 MTU (Maximum Transmission Unit) specifies the largest possible size of a data packet
Authentication method CHAP | PAP | None; Default: None The Authentication method that your GSM carrier uses to authenticate new connections on its network
Username string; Default: " " The username used to connect to your carrier’s network. This field becomes available when you select an authentication method (i.e., the selected authentication method is not “None”)
Password string; Default: " " The password used to connect to your carrier’s network
Service mode 2G only | 3G only | 4G (LTE) only | Automatic; Default: Automatic Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE) you can specify to which type of network you wish to connect to, e.g., if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity
Deny data roaming yes | no; Default: no When enabled this function prevents the device from establishing mobile data connection while not in your home network
Use IPv4 only yes | no; Default: yes When enabled this function makes the device use only IPv4 settings when connecting to an operator
Mobile Data On Demand
Enable yes | no; Default: no Toggles Mobile Data On Demand ON or OFF. The Mobile Data On Demand function keeps the mobile data connection ON only when it is in use.

NOTE: This function is only available whith PPP Connection type

No data timeout (sec) integer [10..3600]; Default: 10 Mobile data connection will be terminated if no data is transferred during the timeout period specified in this field
Force LTE network
Enable yes | no; Default: no Toggles Force LTE network ON or OFF
Reregister yes | no; Default: no When enabled the modem will reregister before trying to connect to an LTE network
Timeout (sec) integer [180..3600]; Default: 300 Time in seconds between attempts to connect to an LTE network

Mobile Data Limit

The Mobile Data Limit window provides you with the ability to set a data limit for your SIM card in order to protect yourself from unwanted data charges.


Network mobile mobile data limit rut850.PNG

Field name Value Description
Data Connection Limit Configuration
Enable data connection limit yes | no; Default: no Toggles data limit ON or OFF
Data limit* (MB) integer; Default: " " The received data limit. After reaching the specified data limit, the router will kill your current mobile data connection
Period Month | Week | Day; Default: Month Period for which the data limit applies to
Start day | Start hour day [1..31] | day [Monday..Sunday] | hour [1..24]; Default: day 1 Data limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the data limit counter will reset and start counting the data limit over again
SMS Warning Configuration
Enable SMS warning yes | no; Default: no Toggles SMS Warning ON or OFF. SMS Warning Configuration provides you with the ability to configure a rule that sends you an SMS message after the router reaches a specified amount of data.
Data limit* (MB) integer; Default: " " The received data limit. After reaching the specified data limit, the router will send out an SMS warning message to the specified phone number
Period Month | Week | Day; Default: Month Period for which the data limit applies to
Start day | Start hour day [1..31] | day [Monday..Sunday] | hour [1..24]; Default: day 1 Data limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the data limit counter will reset and start counting the data limit over again
Phone number phone number; Default: " " Recipient's phone number

*Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur

Clear Data Limit


The Clear Data Limit section contains only one button - the Clear data limit button, which resets the configured data limits.

Network mobile clear datalimit.PNG

Remember that the Clear data limit button doesn't clear the actual SIM used data counter, only the received data counters of the router!