Difference between revisions of "RUT300 Overview"

From Teltonika Networks Wiki
(Created page with "{{Template: Networking_rutos_manual_overview <!------------------------DEVICE-----------------------> | name = RUT300 | series = RUT30X <!----------------------SEPARATORS---...")
m (LorurnA moved page Draft:RUT300 Overview to RUT300 Overview without leaving a redirect)
(No difference)

Latest revision as of 08:10, 12 March 2021

Main Page > RUT Routers > RUT300 > RUT300 Manual > RUT300 WebUI > RUT300 Status section > RUT300 Overview

The information in this page is updated in accordance with firmware version RUT30X_R_00.07.02.7.


The Overview page contains various information summaries and shortcuts to other pages. It is also the homepage of the WebUI. This chapter is an overview of the Overview page for RUT300 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rut30x manual webui basic advanced mode.gif


The Overview page contains widgets that display the status of various systems related to the device. The figure below is an example of the Overview page:

Networking rut30x manual overview v1.png

The same calculation principle applies to the Signal strength LEDs located on your device. You can find more information on signal strength values and different measurements here.

Widget button: Info

The Info (Trb14x webui status overview widget button info icon v2.png) button is located next to the name of some widgets. Clicking the Info button redirects the user to a status page related to the widget's displayed information. For example, clicking the Info button on the System widget would redirect the user to the Status → System page:

Networking rut30x manual overview widget button info action v1.png