Difference between revisions of "RUT360 LEDs"

From Teltonika Networks Wiki
m (LorurnA moved page Draft:RUT360 LEDs to RUT360 LEDs without leaving a redirect)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
{{Template: Networking_rutos_manual_leds
 
{{Template: Networking_rutos_manual_leds
 
<!------------------------DEVICE----------------------->
 
<!------------------------DEVICE----------------------->
| name         = RUT360
+
| name       = RUT360
| series       = RUT3
+
| series     = RUT36X
 
<!----------------------SEPARATORS--------------------->
 
<!----------------------SEPARATORS--------------------->
| eth_leds     = 1  <!-- 1 for green; 2 for green & orange -->
+
| 2g          = 0  <!-- 1 has 2G; 0 doesn't have 2G -->
| mobile       = 1  <!-- 1 has mobile; 0 doesn't have mobile -->
+
| eth        = 1  <!-- 1 has ETH; 0 doesn't have ETH -->
| mobile_leds = 3  <!-- number of mobile signal strength type LEDs -->
+
| eth_leds   = 1  <!-- 1 for green; 2 for green & orange -->
| power_leds   = 1  <!-- number of power LEDs -->
+
| mobile     = 1  <!-- 1 has mobile; 0 doesn't have mobile -->
| wan         = 0  <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
+
| mobile_leds = 3  <!-- number of mobile signal strength type LEDs -->
| wifi         = 0  <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs -->
+
| power_leds = 1  <!-- number of power LEDs -->
 +
| wan         = 0  <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
 +
| wifi       = 0  <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs -->
 
}}
 
}}

Latest revision as of 14:42, 21 January 2021

Main Page > RUT Routers > RUT360 > RUT360 Manual > RUT360 LEDs

This page contains information the different types of LEDs and their behaviour on a RUT360 device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

Networking rut360 manual leds power led.png

It indicates whether the device is powered on or not.

State Description
LED turned on Device is powered on.
LED turned off Device is not powered on.

Ethernet port LEDs

The Ethernet port LEDs are located on the device's front panel, under each respective Ethernet port.

Networking rut360 manual leds ethernet leds.png

State Description
LED on Operating as a 10/100 Mbps connection.
LED off No link established.
LED blinking Connection established and there is activity on this port (data being transferred).

Mobile network type LEDs

The mobile network type LEDs are located near the SIM card slot.

Networking rut360 manual leds mobile network type leds.png

They display which type of Internet connection is currently active.

Action Description
3G LED turned on Device is connected to a 3G network.
4G LED turned on Device is connected to a 4G network.
3G blinking Device is connected to a 3G network but hasn't received an IP address.
4G blinking Device is connected to a 4G network but hasn't received an IP address.
3G & 4G LEDs blinking at the same time every 500 ms No SIM card or incorrect PIN.
3G & 4G LEDs turns on and off in a sequence one after the other The device is attempting to connect to a mobile network operator.

Mobile signal strength indication LEDs

The mobile signal strength indication LEDs are located near the SIM card slot.

Networking rut360 manual leds mobile signal strength leds.png

The number of lit up LEDs represents a different mobile signal strength (RSSI) value in dBm.

No. of lit up LEDs Signal strength value
0 ≤ -111 dBm
1 -110 dBm to -82 dBm
2 -81 dBm to -52 dBm
3 ≥ -51 dBm