RUT360 Logs

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT360 > RUT360 Manual > RUT360 WebUI > RUT360 Status section > RUT360 Logs

The information in this page is updated in accordance with firmware version RUT36X_R_00.07.01.


Summary[edit | edit source]

The Logs section contains information on various device related events. This article is an overview of the Logs section for RUT360 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rut36x manual webui basic advanced mode.gif

Events Log[edit | edit source]

The Events Log section contains a chronological list of various events related to the device. The figure below is an example of the Events Log page:

Networking rutos manual logs events log.png

Traffic Log

The Traffic Log section displays traffic which goes through one of the WAN interfaces. The device does collect data for the Traffic Log by default. To see Traffic Log information you must first enable Traffic Logging from the Network → Traffic Logging page.

The figure below is an example of the Traffic Log.

Networking rutos manual logs traffic log.png

Hotspot Log

The Hotspot Log section displays Hotspot user information. The figure below is an example of the Hotspot Log.

Networking rutos manual logs hotspot log.png