RUT900 Port Mirroring (legacy WebUI)

Main Page > RUT Routers > RUT900 > RUT900 Manual > RUT900 Legacy WebUI > RUT900 Services section (legacy) > RUT900 Port Mirroring (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT9XX_R_00.06.09.

Note: this user manual page is for RUT900's old WebUI style available in earlier FW versions.

SummaryEdit

Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets (incoming or outgoing) on one Ethernet port (Source Port) to another (Monitoring Port).

This page of the user manual provides an overview of the Port Mirroring service in RUT900 devices.

Port MirroringEdit

To configure Port Mirroring, first select a 'Monitoring Port' in the Switch section (1) (possible values correspond with the number of LAN Ethernet ports on your device). Once you do, the Source Ports section will become available for configuration, where you will be able to select the mirrored ports. You can choose to mirror received (incoming) packets (2), transferred (outgoing) packets (3) or both.

Networking rut manual port mirroring.png

(Port numbering is identical to Ethernet port numbering on your device.)