RUT900 Services (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 11:17, 3 June 2021 by Dziugas (talk | contribs) (Created page with "{{Template: Networking_rut_manual_services_legacy <!------------------------DEVICE-----------------------> | name = RUT900 | series = RUT9XX }}")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT900 > RUT900 Manual > RUT900 Legacy WebUI > RUT900 Status section (legacy) > RUT900 Services (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT9XX_R_00.06.09.5.

Note: this user manual page is for RUT900's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

The Services page is used for easy service management. From here you can monitor your device's services states. Click a button to access respective section where it was originally configured.

This chapter of the user manual provides an overview of the Services page for RUT900 devices.

Services

The Services page displays the status of most of the device's services. Services that are currently inactive are displayed in a red font, while active ones are highlighted in green.

The figure below is an example of the Services page:

Networking rut900 manual services.png

Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.

Additional notes:

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT900_Services_(legacy_WebUI)&oldid=79966"