Difference between revisions of "RUT900 UPNP"

From Teltonika Networks Wiki
Line 1: Line 1:
==Summary==
+
{{Template:Networking rut2xx upnp
 
+
| name                        = RUT900
'''UPnP''' allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers
+
| series                      = RUT9xx
 
+
| fw_version                  = RUT9XX_R_00.06.05.3
==General Settings==
+
| file_redirects              = Networking_rut2xx_manual_upnp_redirects_v2.png
 
+
| file_settings1              = Networking_rut2xx_manual_upnp_settings1_v2.png
[[Image:Services upnp general.PNG]]
+
| file_settings2              = Networking_rut2xx_manual_upnp_settings2_v2.png
 
+
| file_ACLs                    = Networking_rut2xx_manual_upnp_acls_v2.png
<table class="nd-mantable">
+
}}
    <tr>
 
        <th>field name</th>
 
      <th>value</th>
 
      <th>description</th>
 
    </tr>
 
    <tr>
 
      <td>Enable</td>
 
      <td>yes | no; Default: '''no'''</td>
 
      <td>Toggles UPnP ON or OFF</td>
 
    </tr>
 
    <tr>
 
      <td>Use secure mode</td>
 
      <td>yes | no; Default: '''yes'''</td>
 
      <td>Toggles Secure mode ON or OFF</td>
 
    </tr>
 
 
 
</table>
 
 
 
==Advanced Settings==
 
 
 
[[Image:Services upnp advanced.PNG]]
 
 
 
<table class="nd-mantable">
 
    <tr>
 
        <th>field name</th>
 
      <th>value</th>
 
      <th>description</th>
 
    </tr>
 
    <tr>
 
      <td>Use UPnP port mapping</td>
 
      <td>yes | no; Default: '''yes'''</td>
 
      <td>Toggles UPnP port napping ON or OFF</td>
 
    </tr>
 
    <tr>
 
      <td>Use NAT-PMP port mapping</td>
 
      <td>yes | no; Default: '''yes'''</td>
 
      <td>Toggles NAT-PMP port mapping ON or OFF</td>
 
    </tr>
 
    <tr>
 
    <td>Device UUID</td>
 
        <td>yes | no; Default: '''yes'''</td>
 
        <td>Specify Universal unique ID of the device</td>
 
    </tr>
 
</table>
 
 
 
==UPnP ACLs==
 
 
 
ACLs specify which external ports may be redirected to which internal addresses and ports
 
 
 
[[Image:Services upnp acls.PNG]]
 
 
 
<table class="nd-mantable">
 
    <tr>
 
        <th>field name</th>
 
      <th>value</th>
 
      <th>description</th>
 
    </tr>
 
    <tr>
 
      <td>Comment</td>
 
      <td>string; Default: '''Allow high ports'''</td>
 
      <td>Adds a comment to this rule</td>
 
    </tr>
 
    <tr>
 
      <td>Ecternal ports</td>
 
      <td>integer [0..65535]] | range of integers [0-65535]; Default: '''1024-65535'''</td>
 
      <td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
 
    </tr>
 
    <tr>
 
    <td>Internal Addresses</td>
 
        <td>ip/integer [0..32]; Default: '''0.0.0.0/0'''</td>
 
        <td>Internal address to be redirect to</td>
 
    </tr>
 
    <tr>
 
    <td>Internal ports</td>
 
        <td>integer [0..65535]] | range of integers [0-655355]; Default: '''1024-65535'''</td>
 
        <td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
 
    </tr>
 
    <tr>
 
    <td>Action</td>
 
        <td>allow | deny; Default: '''allow'''</td>
 
        <td>Allows or forbids the UPnP service to open the specified port</td>
 
    </tr>
 
</table>
 
 
 
[[Category:RUT900 WebUI]]
 

Revision as of 16:57, 24 February 2020

Main Page > RUT Routers > RUT900 > RUT900 Manual > RUT900 WebUI > RUT900 Services section > RUT900 UPNP