Difference between revisions of "RUT900 UPNP"
From Teltonika Networks Wiki
(Created page with "==Summary== '''UPnP''' allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers ==General Set...") |
|||
| Line 7: | Line 7: | ||
[[Image:Services upnp general.PNG]] | [[Image:Services upnp general.PNG]] | ||
| − | + | <table class="nd-mantable"> | |
| − | + | <tr> | |
| − | + | <th>field name</th> | |
| − | + | <th>value</th> | |
| − | + | <th>description</th> | |
| − | + | </tr> | |
| − | + | <tr> | |
| − | + | <td>Enable</td> | |
| − | + | <td>yes {{!}} no; Default: '''no'''</td> | |
| − | + | <td>Toggles UPnP ON or OFF</td> | |
| − | + | </tr> | |
| − | + | <tr> | |
| − | + | <td>Use secure mode</td> | |
| − | + | <td>yes {{!}} no; Default: '''yes'''</td> | |
| − | + | <td>Toggles Secure mode ON or OFF</td> | |
| + | </tr> | ||
| + | |||
| + | </table> | ||
==Advanced Settings== | ==Advanced Settings== | ||
Revision as of 16:06, 17 December 2018
Main Page > RUT Routers > RUT900 > RUT900 Manual > RUT900 WebUI > RUT900 Services section > RUT900 UPNPSummary
UPnP allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers
General Settings
| field name | value | description |
|---|---|---|
| Enable | yes | no; Default: no | Toggles UPnP ON or OFF |
| Use secure mode | yes | no; Default: yes | Toggles Secure mode ON or OFF |
Advanced Settings
| FIELD NAME | VALUE | DESCRIPTION |
|---|---|---|
| Use UPnP port mapping | yes | no; Default: yes | Toggles UPnP port napping ON or OFF |
| Use NAT-PMP port mapping | yes | no; Default: yes | Toggles NAT-PMP port mapping ON or OFF |
| Device UUID | yes | no; Default: yes | Specify Universal unique ID of the device |
UPnP ACLs
ACLs specify which external ports may be redirected to which internal addresses and ports
| FIELD NAME | VALUE | DESCRIPTION |
|---|---|---|
| Comment | string; Default: Allow high ports | Adds a comment to this rule |
| Ecternal ports | integer [0..65535]] | range of integers [0-65535]; Default: 1024-65535 | External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers |
| Internal Addresses | ip/integer [0..32]; Default: 0.0.0.0/0 | Internal address to be redirect to |
| Internal ports | integer [0..65535]] | range of integers [0-655355]; Default: 1024-65535 | Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers |
| Action | allow | deny; Default: allow | Allows or forbids the UPnP service to open the specified port |
