RUT900 Wake on LAN

Main Page > RUT Routers > RUT900 > RUT900 Manual > RUT900 WebUI > RUT900 Services section > RUT900 Wake on LAN

The information in this page is updated in accordance with firmware version RUT9_R_00.07.01.1.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.08.5 and earlier) user manual page.

SummaryEdit

Wake on LAN (WOL) is feature that can "wake up" compliant computers from sleep mode by sending a "magic packet" to the network interface adapter. This chapter is an overview of the Wake on LAN page in RUT900 devices.

Note: Wake on LAN is additional software that can be installed from the Services → Package Manager page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rut9 manual webui basic advanced mode.gif

Wake on LAN configurationEdit

You can set up the WOL function to use a broadcast address when waking up devices or wake all connected devices on click from the Wake on LAN configuration section:

Networking rutos manual wake on lan configuration.png

Field Value Description
Broadcast off | on; default: off If checked, the WOL function sends a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF) whenever it is asked to wake a device. When you send a packet to the broadcast address it is received by all LAN devices.
Wake all devices - (interactive button) Wakes all devices by sending a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF).

Wake on LAN devicesEdit

The Wake on LAN devices section is used to configure entries for LAN devices that can later be woken up by the WOL function. Refer to the figure bellow for information on the fields contained in the Wake on LAN devices section.

Networking rutos manual wake on lan devices.png

Field Value Description
Name string; default: example A custom name for the device. Only used for easier management purposes.
MAC mac; default: 11:22:33:44:55:66 MAC address of the network interface card of the computer that will be "woken up".
Password string; default: AABBCCDDEEFF SecureON Password - sends given password when attempting to wake the host. Some computers have a BIOS feature that secures the WOL feature with a password. If your BIOS does not require such a password, leave this field empty.
Wake on Boot off | on; default: off Indicates whether the device should be "woken up" on device startup.
Wake device - (interactive button) Sends a magic packet to the specified device.
Delete - (interactive button) Deletes the device configuration.
Add - (interactive button) Add a new Wake on LAN device entry to the list.

See alsoEdit