157
edits
Changes
RUT955 Activating DIN1 with relay (view source)
Revision as of 16:40, 12 March 2021
, 16:40, 12 March 2021no edit summary
This section will provide example how to safely use an external Relay for RUT955 DIN1 (passive/dry) control, when using Common ground:
==Activating DIN1 with relay==
This section will provide example how to safely use an external Relay for RUT955 DIN1 (passive/dry) control, when using Common ground.
==Connection scheme==
[[File:Rut955_activating_din1_with_relay.png]]
[[File:Rut955_activating_din1_with_relay.png]]
When connecting external diode make sure you connect it as close to Relay's coil contacts as possible.
When connecting external diode make sure you connect it as close to Relay's coil contacts as possible.
[[Category:RUT955 Hardware Application Examples]]
-------------------------
<b><sup>1</sup></b> this scenario is possible1 when RUT955 power supply uses the same ground as Relay Control signal.
