RUT955 Overview

Main Page > RUT Routers > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 Status section > RUT955 Overview

The information in this page is updated in accordance with firmware version RUT9_R_00.07.00.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.08.3 and earlier) user manual page.

SummaryEdit

The Overview page contains various information summaries and shortcuts to other pages. It is also the homepage of the WebUI. This chapter is an overview of the Overview page for RUT955 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

 

OverviewEdit

The Overview page contains widgets that display the status of various systems related to the device. The figure below is an example of the Overview page:


 

Mobile widget


The Mobile widget displays information related to the mobile connection and the current signal strength ( ). Each filled-up bar represents a different RSSI value:

bars signal strength value / RSSI (in dBm)
0 ≤ -111
1 -110 to -97
2 -96 to -82
3 -81 to -67
4 -66 to -52
5 ≥ -51

The same calculation principle applies to the Signal strength LEDs located on your device. You can find more information on signal strength values and different measurements here.

Widget button: InfoEdit


The Info ( ) button is located next to the name of some widgets. Clicking the Info button redirects the user to a status page related to the widget's displayed information. For example, clicking the Info button on the System widget would redirect the user to the Status → System page: