The information in this page is updated in accordance with firmware version RUTX_R_00.07.02.
The WAN page is used to to set up WAN network interfaces, which are used to connect device with external networks.
This manual page provides an overview of the WAN windows in RUTX08 devices.
The WAN section displays WAN network interfaces currently existing on this device.
From here you can change interfaces priority* or enter an interface's configuration page.
* You can change the priority by dragging and dropping an interface to another position. Moving an interface changes its metric value in the configuration file. Interfaces that are higher on the list have greater priority.
This section provides information on WAN interface configuration. There is one type of WAN interface on the device:
To begin configuring an interface, click the 'Edit' button on the right side of the interface:
on; default: off Bridges physical interfaces specified in this configuration. Enable STP off