The information in this page is updated in accordance with firmware version RUTX_R_00.02.03.1
This page is an overview of the Administration section of RUTX09 devices.
|Device name||string; default: RUTX09||Device model name.|
|Hostname||string; default: Teltonika-RUTX09.com||Device hostname. This can be used for communication with other LAN hosts.|
|Mode||Basic | Advanced; default: Basic||Mode determines what options and configurations are shown. In Basic mode only the essential configurations are shown. In Advanced mode there is greater freedom to configure and access more options.|
|Min time||integer [0..60]; default: none||Minimum time (in seconds) the button needs to be held to perform an action.|
|Max time||integer [1..60]; default: none||Maximum time (in seconds) the button can be held to perform an action, after which no action will be performed.|
|Restore to factory defaults||-(interactive button)||Restores device to manufacturer's default settings.|
|Restore to user's defaults||-(interactive button)||Restores device to custom configuration set by the user.|
Users & recipientsEdit
The Users & recipients section is used to configure phone groups and email users.
The Phone groups section is used to manage groups of phone numbers.
Refer to the figure below for information on device Phone groups page.
Modify phone groupEdit
|Group name||string; default: none||Name of this phone numbers group.|
|Phone number||string; default: none||A phone number entry for this group. A phone number containing 0-9*+# characters is accepted.|
The Email users section is used to manage email configurations.
Refer to the figure below for information on device Email users page.
Modify email userEdit
|Secure connection||off | on; default: off||Use if your SMTP server supports TLS or SSL encryption.|
|SMTP server||string; default: none||SMTP server name.|
|SMTP server port||integer [0..65535]; default: none||SMTP server port.|
|User name||string; default: none||Username used in authentication to SMTP server.|
|Password||string; default: none||Password used in authentication to SMTP server.|
|Sender's email address||string; default: none||Configured SMTP server's user's email address.|
The Access Control page is used to manage remote and local access to device.
Important: turning on remote access leaves your device vulnerable to external attackers. Make sure you use a strong password.
|Enable SSH access||off | on; default: on||Turns SSH access from the local network (LAN) on or off.|
|Remote SSH access||off | on; default: off||Turns SSH access from remote networks (WAN) on or off.|
|Port||integer [0..65535]; default: 22||Selects which port to use for SSH access.|
|Enable HTTP access||off | on; default: on||Turns HTTP access from the local network (LAN) to the device WebUI on or off.|
|Enable HTTPS access||off | on; default: on||Turns HTTPS access from the local network (LAN) to the device WebUI on or off.|
|Redirect to HTTPS||off | on; default: off||Redirects connection attempts from HTTP to HTTPS.|
|Enable remote HTTP access||off | on; default: off||Turns HTTP access from remote networks (WAN) to the device WebUI on or off.|
|Port||integer [0..65535]; default: 80||Selects which port to use for HTTP access.|
|Enable remote HTTPS access||off | on; default: off||Turns HTTPS access from remote networks (WAN) to the device WebUI on or off.|
|Port||integer [0..65535]; default: 443||Selects which port to use for HTTPS access.|
|Enable CLI||off | on; default: on||Turns CLI access from the local network (LAN) on or off.|
|Enable remote CLI||off | on; default: off||Turns CLI access from remote networks (WAN) on or off.|
|Port range||range of integers [0..65534]-[1..65535]; default: 4200-4220||Selects which ports to use for CLI access.|
|Shell limit||integer [1..10]; default: 5||Maximum number of active CLI connections.|
|Fail count||integer; default: 10||An amount of times IP address can try to access SSH or WebUI before being blocked.|
|Blocked address||ip||IP address which was blocked due to reaching fail count limit.|
|Failed attempts||integer||Amount of times IP address tried to access SSH or WebUI after getting blocked.|
The Troubleshoot section is used to download various files that contain information used for troubleshooting the device. Refer to the figure and table below for information on the Troubleshoot page.
|System log||- (interactive button)||Displays the contents of the device system log file. The system log contains records of various system related events, such as starts/stops of various services, errors, reboots, etc.|
|Kernel log||- (interactive button)||Displays the contents of the device kernel log file. The kernel log contains records of various events related to the processes of the operating system (OS).|
|Troubleshoot file||- (interactive button)||Downloads the device Troubleshoot file. It contains the device configuration information, logs and some other files. When requesting support, it is recommended to always provide the device Troubleshoot file to Teltonika engineers for analysis.|
|TCP dump file||- (interactive button)||Downloads the device TCP dump file. TCP dump is a program used to capture packets moving through network interfaces. By default, the device does not store TCP dump information. You must enable TCP dump and save the changes before you can download the file.|
|Enable TCP dump*||off | on; default: off||Turns TCP dump packets capture on or off.|
* More on TCP dump in the next section.
TCP dump is a program used to capture packets moving through network interfaces. By default, the device does not store TCP dump information. You must enable TCP dump and save the changes before you can download the file.
If you enable TCP dump, you will notice additional configuration fields appear. Refer to the figure and table below for realted information.
|Enable TCP dump||off | on; default: off||Turns TCP dump packet capture on or off.|
|Select interface||network interface; default: br-lan||Only captures packets that move through the specified network interface.|
|Select protocol filter||all | icmp | tcp | udp | arp; default: All||Only captures packets that match the specified protocol.|
|Select packets direction||Incoming/Outgoing | Incoming | Outgoing; default: Incoming/Outgoing||Only captures packets coming from the specified direction.|
|Host||ip | host; default: none||Only captures packets related to the specified host.|
|Port||integer [0..65335]; default: none||Only captures packets related to the specified communication port.|
|Select storage||Internal storage | / ; default: Internal storage||Specifies where the TCP dump file will be stored.|
The Diagnostics section is used to execute simple network diagnostic tests, including ping, traceroute and nslookup.
|Method||Ping | Traceroute | Nslookup; default: Ping||Selects diagnostic method.
|Protocol||IPv4 | IPv6; default: IPv4||Selects IP address family for diagnostic test.|
|Address||ip | host; default: none||IP address or hostname on which the diagnostic test will be performed.|
|Perform||-(interactive button)||Performs diagnostic test when clicked.|
The Overview setup section is used to select which widgets will be shown in the RUTX09_Overview window.
The Root CA section is used to add a root CA certificate file to the device. There is a default file already preloaded on the device which will be overwritten by any uploaded file. The certificates must be in .pem format, maximum file size is 300 KB. These certificates are only needed if you want to use HTTPS for your services and the default file should be sufficient in most cases.
The Logging section is used to configure how and where the device stores system log data. The system log is a file that contains information on various system related events and is useful to engineers for troubleshooting the device.
Refer to the figure and table below for information on the device Logging page.
|System log buffer size||integer; default: 128||System log buffer size in kibibytes (KiB).|
|External system log server||ip; default: none||IP address of an external server that will be used to store device logs.|
|External system log server port||integer [0..65535]; default: none||TCP/UDP port number of the external log server.|
|External system log server protocol||UDP | TCP; default: UDP||Communication protocol used by the external log server.|
|Save log in||RAM memory | Flash memory; default: RAM memory||Specifies which type of memory to use for storing system logs.|