RUTX09 Logs

From Teltonika Networks Wiki
Revision as of 13:59, 24 August 2020 by Dziugas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUTX Routers > RUTX09 > RUTX09 Manual > RUTX09 WebUI > RUTX09 Status section > RUTX09 Logs

The information in this page is updated in accordance with firmware version RUTX_R_00.02.06.1.

Summary[edit source]

The Logs section contains information on various device related events. This article is an overview of the Logs section for RUTX09 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rutx manual webui basic advanced mode.gif

Events Log[edit source]

The Events Log section contains a chronological list of various events related to the device. The figure below is an example of the Events Log page:

Networking rutos manual logs events log.png

Traffic Log

The Traffic Log section displays traffic which goes through one of the WAN interfaces. The device does collect data for the Traffic Log by default. To see Traffic Log information you must first enable Traffic Logging from the Network → Traffic Logging page.

The figure below is an example of the Traffic Log.

Networking rutos manual logs traffic log.png

Hotspot Log

The Hotspot Log section displays Hotspot user information. The figure below is an example of the Hotspot Log.

Networking rutos manual logs hotspot log.png