RUTX09 Wake on LAN

From Wiki Knowledge Base | Teltonika Networks
Revision as of 18:03, 28 January 2020 by Dziugas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUTX Routers > RUTX09 > RUTX09 Manual > RUTX09 WebUI > RUTX09 Wake on LAN

Summary[edit | edit source]

Wake on LAN (WOL) is feature that can "wake up" compliant computers from sleep mode by sending a "magic packet" to the network interface adapter. This chapter is an overview of the Wake on LAN page in RUTX09 routers.

The information in this page is updated in accordance with the RUTX_R_00.02.01.1 firmware version.

Wake on LAN configuration[edit | edit source]

You can set up the WOL function to use a broadcast address when waking up devices or wake all connected devices on click from the Wake on LAN configuration section:

Networking rutx trb manual wake on lan configuration v1.png

Field name Value Description
Broadcast off | on; default: off If checked, the WOL function sends a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF) whenever it is asked to wake a device. When you send a packet to the broadcast address it is received by all LAN devices.
Wake all devices - (interactive button) Wakes all devices by sending a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF).

Wake on LAN devices[edit | edit source]

The Wake on LAN devices section is used to configure entries for LAN devices that can later be woken up by the WOL function. Refer to the figure bellow for information on the fields contained in the Wake on LAN devices section.

Networking rutx manual wake on lan devices v1.png

Field name Value Description
Name string; default: example A custom name for the device. Only used for easier management purposes.
MAC mac; default: 11:22:33:44:55:66 MAC address of the network interface card of the computer that will be "woken up".
Password string; default: AABBCCDDEEFF SecureON Password - sends given password when attempting to wake the host. Some computers have a BIOS feature that secures the WOL feature with a password. If your BIOS does not require such a password, leave this field empty.
Wake on Boot off | on; default: off Indicates whether the device should be "woken up" on router startup.
Wake device - (interactive button) Sends a magic packet to the specified device.
Delete - (interactive button) Deletes the device configuration.

See also[edit | edit source]