RUTX10 Configuration Backup

Main Page > RUTX Routers > RUTX10 > RUTX10 Configuration Examples > RUTX10 Configuration Backup

The information in this page is updated in accordance with firmware version RUTX_R_00.02.03.3.

IntroductionEdit

This page contains instructions on how to generate and utilize configuration backup files on RUTX10 devices.

Generating a new configuration fileEdit

A configuration backup file contains a device's entire configuration information, including the admin password. After you create a new backup file, you can use it to restore the configuration of the current device or upload it to other identical devices effectively applying the configuration to them.

To generate a configuration backup file, follow the steps described below.

  1. Configure the device according to your needs.
  2. Go to the System → Backup page and click the 'Download' button.
     

Uploading a configuration file to other devicesEdit

You can upload configuration backup files to your device if they were generated on an identical device using the same or an older firmware version (backup files created on devices with newer firmware cannot be uploaded to devices using an older firmware version).

Via the WebUIEdit


To upload and apply a configuration backup file via the device's WebUI, follow the steps described below.

  1. Go to the System → Backup page.
  2. Click the 'Browse' button and find your backup file on your computer.
  3. Click the 'Upload Archive' button.
     
  4. Wait for the device to reboot.

Via RMSEdit


To upload and apply a configuration backup file via RMS, follow the steps described below.


  1. Login to your RMS account and go to the Files → Configuration page.
     
  2. Hover your mouse cursor over the Files tab and click Add new.
     
  3. Click the File field and find your backup file.
  4. Click the 'Upload' button.
     
  5. Go back to the RMS home page and select your device in the device table.
  6. Hover your mouse cursor over the Configuration tab and click Configure device.
     
  7. Click the Configuration field and find your backup file.
  8. Click the 'Select' button.
     

Upload to multiple devicesEdit


You can also upload the same configuration backup file to multiple devices at once using the same method. Simply select however many devices you wish to upload to and click Upload backup.