From Teltonika Networks Wiki
Revision as of 10:35, 31 August 2020 by Dziugas (talk | contribs) (Created page with "{{Template: Networking_rutos_manual_leds <!------------------------DEVICE-----------------------> | name = RUTX10 | series = RUTX <!----------------------SEPAR...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUTX Routers > RUTX10 > RUTX10 Manual > RUTX10 LEDs

This page contains information the different types of LEDs and their behaviour on a RUTX10 device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

Networking rutx10 manual leds power led.png

It indicates whether the device is powered on or not.

State Description
LED turned on Device is powered on.
LED turned off Device is not powered on.

WiFi band LEDs

The WiFi band LEDs are located at the bottom of the front panel of the device, to the left of the Ethernet ports.

Networking rutx10 manual leds wifi leds.png

They display whether a WiFi Access Point (AP) is active on a specific band.

State Description
2.4 LED turned on. At least one 2.4 GHz Access Point is running.
2.4 LED turned off No 2.4 GHz Access Points are running.
5 LED turned on At least one 5 GHz Access Point is running.
5 LED turned off No 5 GHz Access Points are running.