RUTX11 Logs

Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 Status section > RUTX11 Logs

The information in this page is updated in accordance with firmware version RUTX_R_00.07.00.

SummaryEdit

The Logs section contains information on various device related events. This article is an overview of the Logs section for RUTX11 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

 

Events LogEdit

The Events Log section contains a chronological list of various events related to the device. The figure below is an example of the Events Log page:

 

Traffic Log

The Traffic Log section displays traffic which goes through one of the WAN interfaces. The device does collect data for the Traffic Log by default. To see Traffic Log information you must first enable Traffic Logging from the Network → Traffic Logging page.

The figure below is an example of the Traffic Log.

 

Hotspot Log

The Hotspot Log section displays Hotspot user information. The figure below is an example of the Hotspot Log.