RUTX11 System

From Wiki Knowledge Base | Teltonika Networks
Revision as of 20:14, 28 January 2020 by Dziugas (talk | contribs)

Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 Status section > RUTX11 System


The System window displays basic information related to the device's hardware, software and memory state.

The information in this page is updated in accordance with the RUTX_R_00.02.01.1 firmware version.


The figure bellow is an example of the System page and the table below provides information on the fields contained in that page:

Networking rutx11 manual system v3.png

Field Name Description
Device name The device's brand name.
Product code a.k.a., ordering code, displays under which product code the device was manufactured. Different product codes indicate different versions of the overall product. For example, devices with different product codes may support different LTE bands, come with different accessories, different firmware, etc.
Serial number A unique 10-digit device identifier. It is required when connecting the device to Teltonika's Remote Management System (RMS). The device can be added to RMS via the Services → Cloud Solutions → RMS page.
Hardware revision A 4-digit number representing the router's hardware revision version.
Batch number A 4-digit number that indicates the batch of materials.
Model The modem's model number.
IMEI The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify mobile modules. GSM network operators use the IMEI to identify devices in their networks.
FW version Modem's current firmware version.
Firmware version Displays the firmware version currently installed in the device. The firmware can be upgraded from the System → Firmware page.
You can download firmwares for RUTX11 from here.
Kernel version Displays the device's kernel version. A kernel is a computer program responsible for connecting a device's software to its hardware
Local device time Displays the current time as perceived by the device. Time settings can be adjusted in the Services → NTP page.
Uptime Displays the amount of time that has passed since the device's last start up.
Load average Displays the device's CPU load average (in %) over the last minute, 5 minutes and 15 minutes.
RAM used Displays the amount of currently used random-access memory (RAM).
RAM Buffered Displays the amount of random-access memory (RAM) used by temporarily stored data before moving it to another location.
Flash used Displays the amount of currently used flash memory.