Changes

feel like doing this, set the '''Channel''' field to '''Auto''' and the router will pick the least busy channel in your location automatically.  

feel like doing this, set the '''Channel''' field to '''Auto''' and the router will pick the least busy channel in your location automatically.  

[[File:Networking_rutxxx_manual_wireless_device_configuration_general_setup_v2.png|border|class=tlt-border]]

[[File:Networking_rutxxx_manual_wireless_device_configuration_general_setup_v3.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

       <td>Enable</td>

       <td>Enable</td>

       <td>off {{!}} on; default: '''on'''</td>

       <td>off {{!}} on; default: '''on'''</td>

       <td>Toggle Wireless device on or off</td>

       <td>Toggle Wireless device on or off.</td>

     </tr>

     </tr>

     <tr>

     <tr>

         <td>[5%...100%]; default: '''100%'''</td>

         <td>[5%...100%]; default: '''100%'''</td>

         <td>The transmit power of an access point radio is proportional to its effective range – the higher the transmit power, the more distance that a signal can travel, and/or the more physical materials that it can effectively penetrate and still have data successfully resolved at the receiver.</td>

         <td>The transmit power of an access point radio is proportional to its effective range – the higher the transmit power, the more distance that a signal can travel, and/or the more physical materials that it can effectively penetrate and still have data successfully resolved at the receiver.</td>

     </tr>

     </tr>

</table>

</table>

The '''Advanced Settings''' tab is used to configure how the wireless Access Point will work from a hardware perspective.  

The '''Advanced Settings''' tab is used to configure how the wireless Access Point will work from a hardware perspective.  

[[File:Networking_rutxxx_manual_wireless_device_configuration_advanced_settings_v1.png]]

[[File:Networking_rutxxx_manual_wireless_device_configuration_advanced_settings_v2.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

       <th>description</th>

       <th>description</th>

     </tr>

     </tr>

    <tr>

<tr>

    <td>Country code</td>

      <td>Allow legacy 802.11b rates</td>

        <td>country code; default: '''US - United States'''</td>

      <td>off {{!}} on; default: '''on'''</td>

        <td>SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard.</td>

      <td>Turn on to enable connections that uses legacy 802.11b standard.</td>

     </tr>

     </tr>

     <tr>

     <tr>