TCR100 Firmware Downloads

From Teltonika Networks Wiki
Main Page > TCR Routers > TCR100 > TCR100 Firmware Downloads

This page contains firmware files for TCR100 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in TCR100 Firmware.

TCR100

File Type Release date Size MD5 Changelog
TCR1_R_00.07.05.4_WEBUI.bin Latest FW 2023.11.09 11.13 MB ab475a5d3564755c1d4207a8cd7ae8a3 Link
TCR1_R_00.07.05.4_WEBUI.bin Mass production FW 2023.11.09 11.13 MB ab475a5d3564755c1d4207a8cd7ae8a3 Link
TCR1_R_GPL_00.07.05.4.tar.gz SDK 2023.11.09 97.16 MB 72da0f68d368702cea77fb1326a07402


Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.


FW checksums


Checksums for firmware files can be found here.

Changelog

Global RUTOS changelog can be found here: LINK

* This is universal changelog of RUTOS. Changes made to features that are not present in some devices, do not affect them.


TCR1_R_00.07.06.3 | 2024.01.17

Note: Firmware version TCR1_R_00.07.06.3 was removed due to an issue with mismatching wireless SSID between device housing label and default device SSID on factory configuration.


TCR1_R_00.07.05.4 | 2023.11.09

  • Improvements
    • WebUI
      • Improved asynchronous pagination in events log pages
      • Optimized Overview page load
      • Added resource loading cancellation after switching to different page

TCR1_R_00.07.05 | 2023.10.09

  • New
    • Network
      • Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
      • Added "gamma" APN to auto-APN database
      • Added "soracom.io" APN for Soracom operator to APN database
      • Added "simbase" APN to auto-APN database
      • Added "pnd" APN for Pond IoT to auto-APN database
      • Added "spitfire1" APN for Spitfire operator to APN database
      • Software Offloading enabled on default configuration
      • New argument in "gsmctl" CLI command for Carrier aggregation
      • Numeric mode support for modem AT commands
      • Enabled dynamic MTU configuration on mobile interfaces by default
      • WDS support for wireless bridging
    • Services
      • DLMS Client package
      • 7zip package
      • TincVPN package
      • Added router uptime and mobile connection uptime data parameters to SNMP
      • Custom MQTT publisher/subscriber topics definition support
      • Alternative configuration file upload support for MQTT Broker service
      • Device Provisioning Service support for Azure IoT Hub service
      • Added more mobile usage parameters to SNMP
    • WebUI
      • Firewall status page
      • Page search feature
      • Network Topology page
      • "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
      • Package Restore feature Enable/Disable option
      • Hotspot client connection/disconnection trap option for SNMP service
      • Added Events log trap option for SNMP service
      • Confirm dialog when cancelling a verified package in Package Manager
      • "Bridge ALPN" option for Bridge configuration in MQTT Broker service
      • New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
      • Specific firmware packages repository link in Package Manager page
      • Ability to enter decryption passphrase for encrypted private keys
      • "Reconnect" button in RMS page
      • New event "Device startup completed" in Events Reporting service
      • Port status and configuration page
      • Wireless interface QR code generator
      • Channel analysis page Status -> Wireless -> Channel Analysis
      • Disabled direct network interface deletion when it is associated with a wireless interface
      • Limited to a single section configuration and added IP address field for Relayd service
      • "Fast roaming" configuration for Wireless service in Client mode
      • Updated Status->Network->Wireless page to display interfaces as cards and added ability to filter connected clients by selected interface
      • Modem Debug page
      • APN database management page added to package manager
      • Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script"
      • Ability to unblock SIM card and insert SIM PIN in Overview page
      • New SMS rules "Reset mobile connection" and "Reload config"
      • "SMS limit clear due" display in Overview page
      • Added modem temperature to System -> Status page
      • IP6 table configuration option for DHCPv6 protocol in Network -> WAN page
    • System
      • Mechanism to rebrand WebUI using GPL
      • Possiblity to create web applications with closed-source GPL
  • Improvements
    • Network
      • Moved FRR VTYSH package to package manager
      • Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
      • Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
      • Improved auto APN selection
      • SMS sending event is now logged into events log
      • Improved roaming control
      • Removed unused APN usernames and passwords from auto-APN database
      • Added connection to the operator when no mobile interfaces are active
      • Improved VoLTE management functions
      • Improved cases where Low Signal Reconnect sometimes executed prematurely
      • Improved wrong SIM PIN remove logic
      • Added automatic reconfiguration when switching between wireless interface modes
      • Added automatically generated name option for new network
      • Updated default subnet to 192.168.3.0/24 for Guest Network
    • Services
      • New reworked Data to Server
      • UPNP moved to package manager
      • Added IPv6 support for Modbus TCP Server/Client services
      • Refactored Azure IoT Hub service
      • Improved resiliency to timeouts in Modbus Client service
      • Added PDU data type to Modbus read requests
      • Added new formatters for MQTT alarms in Modbus Client service
      • Added main section to make test functions independent in Modbus Client service
      • Improved WAN IP register reading time in Modbus service
      • Sped up default profile and profile template generation for Profiles functionality
      • Optimized profile change time for Profiles functionality
      • Added IPv6 support for Stunnel VPN
      • Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
      • Improved TCPdump by allowing to capture packets from any interface
      • Added OSPF support for DMVPN
      • Updated Hotspot password hashing to sha512
      • A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
      • Allowed connection to SMPP server using IPv6 address
      • Extended IP unblock action functionality in SMS Utilities
      • Increased allowed Email to SMS service message size to 61440 bytes
      • Added I/O pin name to trap notification message
    • WebUI
      • Reorganized menu
      • Updated header design
      • Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
      • Moved Interfaces IPv6 configuration into seperate tab
      • Added client/server status information in OpenVPN instance overview page
      • Added more IPv6 information to interface status in Interfaces page
      • Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
      • Disabled DHCPv6 interface editing while in basic mode
      • Refactored custom DHCP options into seperate modal
      • Added automatic start and end IP allocation for DHCP server configuration in Interfaces
      • Added client/server status information in L2TP VPN page
      • Added "MTU" field to L2TP client configuration page
      • Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration
      • Added more detailed IPsec VPN status information
      • Encryption AES-256-CBC added as default in OpenVPN
      • Added "Authentication algorithm" support to OpenVPN configuration with static key mode
      • Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface
      • Improved Hotspot landing page theme package removal
      • Added upload and download theme functionality to Hotspot Landing page
      • Improved ZeroTier VPN bridge configuration
      • Added ability to adjust order of rules in Firewall page
      • Added IPv6 RAW table to be displayed in Status -> Firewall
      • Improved file upload component's visual appearance
      • Change "Allow anonymous" option default value to 0 in MQTT Broker
      • Added option to specify "Client ID" in MQTT Publisher
      • Added functionality to select specific interface in Web Filter service
      • Allowed to select FTP server subfolder in Traffic Logging service
      • Renamed various service master/slave naming convention in config files, package names and webUI to client/server
      • Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
      • Updated Status -> Network -> Mobile page layout
      • Added bandwidth, provider in Status -> Network -> Mobile page
      • Added colors for signal strength values in Status -> Network -> Mobile page
      • Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
      • Refactored network type selection in Network -> Mobile -> General page
      • Serving cell information is not returned anymore when SIM card is not inserted
      • Changed default "Check interval" option value in Network -> Mobile -> SIM Switch page
      • Added button in a Scanned operators table which allows to add an operator to the operator list
      • Added search bar in Mobile Utilities -> SMS Utilities page
      • Added SMS sent and limit count to Network -> Mobile -> General page
      • Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3G
      • Added DFS channel marking in Network -> Wireless
      • Show wireless MAC address even when interface is inactive in Status -> System page
      • Merged Multi AP configuration to wireless interface edit modal
      • Added automatic network switch to bridge if selected in Wireless configuration
      • Added default encryption for newly created wireless interfaces
      • Simplified "802.11r Fast Transition" configuration options in Wireless interface configuration
    • System
      • Updated kernel version to 5.4.251
      • Updated UCI version to 2021-10-22
      • Updated SSHFS version to 3.7.1
      • Updated FRR suite to 8.4.2
      • Updated cURL version to 8.2.0
      • Updated TCPdump version to 4.99.4
      • Updated C-ares version to 1.19.1
      • Updated iproute2 version to 5.19.0
      • Updated libubox package version to 2021-08-19
      • Added CVE patch CVE-2023-2650
      • Added additional firmware information in CLI prompt banner
      • Connection mode LED now blinks on data transfer
      • Changed "routername" to "devicename" in system config file
      • Made all clients get disconnected out once dropbear service is disabled
      • Improved firmware downgrade restrictions for certain regions
      • Device name is now displayed in browser tab when in WebUI login page
      • Added NF conntrack information in generated troubleshoot archive
  • Fix
    • Network
      • Fixed UDP Broadcast Relay service crashing on start without physical network device
      • Fixed SMS limit period migration
      • Fixed SMS limit size breaking various functionality
      • Fixed custom IPv6 DNS option not overriding default DNS from operator
      • Fixed an issue with blacklist and whitelist connection
      • Fixed multipart SMS handling
      • Fixed wrong SIM state display when SIM is fully blocked
      • Fixed incorrect virginmobile APN MNC
      • Fixed mobile operator scanning fault when no mobile interfaces are active
      • Fixed mobile interfaces generating multiple events on mobile connection
      • Fixed PDU SMS parsing when operator provides user data header in single part SMS
      • Added scheduled data limit clear for inactive mobile interfaces
      • Fixed wrong or empty WAN state info
      • Fixed Wireless AP and STA functionality for 5GHz band
      • Fixed Wireless scanning issue with certain configuration
      • Fixed Wireless transmit power changing without user input after saving different country code
      • Fixed clients isolation functionality in Wireless
      • Fixed Wireless STA authentification failure in case of channel change
      • Fixed Multi AP startup when changing Multi AP configuration in Wireless
      • Fixed client connection to EAP Wireless network
      • Fixed connection tracking for main interface in Failover
    • Services
      • Fixed reconnecting to inactive connections for Modbus Server service
      • Fixed Modbus Client response after reboot write request
      • Fixed Modbus Server to show error when trying to get operator name without SIM
      • Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
      • Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
      • Fixed WireGuard VPN endpoint resolving problem
      • Peer cache is no longer deleted when ZeroTier service is restarted
      • Fixed RMS data collection about the list of devices connected to WiFi
      • Fixed showing incorrect Internet state in RMS
      • Fixed WiFi client info display in RMS
      • Implemented error handling when device is blocked or unrecognized by RMS
      • Fixed L2TP client sometimes not adding routes on successful connection
      • Fixed NTP time sync with browser functionality in some edge cases
      • Fixed reinstalled packages" verification when device name is changed
      • Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
      • Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
      • Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
      • Fixed IPsec VPN connection problem with small lifetime values
      • Fixed IPsec "Default Route" not working when Flow Offloading is enabled
      • Fixed an issue where system directory could be used as a mount point in SSHFS service
      • Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
      • Fixed package installation process bug when packages have different architecture names
      • Added "bearer token" authentication functionality in Dynamic DNS
      • Fixed MQTT Broker "local_port" option keep settings migration
      • Remove public keys when key-based authentication is disabled in Access Control
      • Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
      • Corrected SNMP MIB file syntax according to standards
      • Fixed returned port count in SNMP
      • Fixed disabled CLI remote access taking up a session slot
      • Fixed received SMS messages parsing with trailing whitespaces
      • Fixed VPN status rule message text in SMS Utilities
    • WebUI
      • Fixed empty events cards in Overview page when no content is available
      • Fixed modal form inputs not clearing upon closing after nested modal is saved
      • Fixed select menu closing when selecting custom option
      • Fixed multi select expanding table row when adding new values
      • Fixed global section caching after deleting a section in a table
      • Fixed unpredictable search logic in tables
      • Fixed interfaces reordering by metrics in Failover page
      • Removed ability to select ports on ICMP and ESP protocol in Failover page
      • Fixed wrong status when interface is disabled in Failover page
      • Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
      • Fixed STP enabling issue in Interfaces
      • Fixed EIGRP status info in Dynamic Routes
      • Fixed issue with custom DHCP options where you could not have multiple values per rule
      • Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
      • Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
      • Fixed failing Firewall rules with united protocol formats
      • Fixed zone select component not closing options menu when selecting an option in Firewall pages
      • Fixed memory leak when cancelling file uploads on Chromium-based browser
      • Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
      • Fixed allowing IDs above 247 in Modbus Client service
      • Fixed selecting SIM in Modbus Client service Alarms
      • Fixed Modbus Alarm telephone number limit
      • Fixed to show available options for test requests on error in Modbus Client service
      • Fixed Modbus Alarm I/O pin display values
      • Fixed issue when creating instance named "gre" does not show in GRE VPN
      • Remote endpoint field now allows underscore character in IPsec VPN
      • Fixed ZeroTier wrong service status display in Status -> Services
      • Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
      • Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
      • Added fixes for key-direction missing problem when uploading OpenVPN config file
      • Fixed login page read-only inputs after custom user logout
      • Fixed issue when double clicking firmware upgrade cancel button returned error
      • Fixed Package Manager prompt message to appear when package requires network restart
      • Fixed showing in queue packages when they contained special symbols in the Package Manager page
      • Fixed various visual Side Widget bugs
      • Fixed Data to Server DNP3 filter from flash display
      • Fixed incorrect source data displayed in Realtime Data -> Connections table
      • Fixed memory expansion confirmation prompt title
      • Fixed incorrect configuration saving in Hotspot 2.0 service
      • Disabled password hashing for new user creation in Hotspot service
      • Fixed Hotspot landing page themes saving bug
      • Fixed test email sending to more than one recipient in Events Reporting page
      • Fixed VLAN OID values in SNMP service
      • Output proper error message in case of hardware not being supported in Firmware Upgrade
      • Fixed being able to open side widget when user does not have read access
      • Fixed profile creation when current configuration is not present
      • Fixed wrong protocol data display in "Access control" page
      • Fixed LAN interfaces not showing up before WAN interfaces in Status -> Realtime Data -> Traffic
      • Fixed carrier aggregation information when no connection is made or SIM card is not inserted
      • Changed representation of mobile cell ID from hexadecimal to integer type
      • Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
      • Fixed an issue where sometimes bands were not represented correctly on certain modems
      • Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
      • Fixed mobile pages throwing 404 error when modem disconnects
      • Fixed WebUI showing mobile connection when no SIM card is inserted
      • Updated Network -> Wireless interface add and delete button visibility in basic mode
      • Fixed Wireless Multi AP incorrect SSID list after removal of an instance
      • Fixed MAC address filtering in Network -> Wireless page to list only connected WiFi devices
      • Fixed "Clear Collect Data" button logic to not clear overall mobile usage info
      • Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled
      • Fixed Guest Network configuration editing in Network -> Wireless page
      • Fixed error when user has no write permissions in Speed Test page
    • System
      • Patched CVE-2023-0386 vulnerability
      • Patched CVE-2023-0464 vulnerability
      • Patched CVE-2023-0465 vulnerability
      • Patched CVE-2023-2602 vulnerability
      • Patched CVE-2023-3772 vulnerability
      • Patched CVE-2023-4128 vulnerability
      • Patched CVE-2023-33476 vulnerability
      • Patched CVE-2023-28484 vulnerability
      • Patched CVE-2023-29469 vulnerability
      • Patched CVE-2023-31490 vulnerability
      • Patched CVE-2023-36369 vulnerability
      • Patched CVE-2023-48174 vulnerability
      • Delayed Custom Scripts execution on boot, after storage devices are mounted
      • Fixed Custom Scripts permissions after save
      • Changed certificate expiry calculation mechanism to fix Y2K38 bug
      • Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
      • Fixed Events Log database rotation to prevent log partition space exhaustion
      • Fixed duplication and sorting of all events IDs in Events Log
      • Fixed FOTA crash when current hours is with leading 0
      • Fixed crontab job removal after disabling FOTA
      • Changed Mosquitto build options to not include cJSON library
      • Fixed device name resetting to default upon refresh in Administration

TCR1_R_00.07.04.5 | 2023.07.24

  • Improvements
    • Network
      • Added metric field support in BGP Route-maps page
  • Fix
    • Network
      • Fixed an issue with MBN selection when device is started for the first time
      • Fixed an issue where MBN activation would not be successful
      • Fixed service provider parsing when operator does not provide all fields for Quectel modems

TCR1_R_00.07.04.4 | 2023.06.26

  • New
    • Network
      • Travelmate package for captive portal redirection
  • Improvements
    • Network
      • Improved mobile operator query methods and operator name parsing in various services
    • Services
      • Improved UPNP lease file validation
    • System
      • Device name is now displayed in browser tab when in login page
  • Fix
    • Network
      • Fixed a connection issue with bridge/passthrough mode when reconnecting ethernet cable
      • Fixed long mobile operator list parsing for whitelist/blacklist functionality
      • Patched CVE-2023-32233 vulnerability
      • Fixed an issue with Multi AP service remaining enabled when disabling
      • Fixed default networks in WAN firewall zone and possibility to add a network that is not yet created
    • Services
      • Fixed connection establishment for RMS MQTT service
      • Implemented partial restart when connection with RMS server fails
      • Fixed device name resetting to default upon WebUI page refresh
      • Fixed being able to set device name without passing validations
      • Fixed WireGuard port change in firewall traffic rule when modifying instance port

TCR1_R_00.07.04.3 | 2023.05.11

  • Improvement
    • System
      • Optimized firmware image size
      • Removed SSH RSA key generation
      • Added SSH ECDSA key generation
  • Fix
    • Network
      • Fixed an issue with mobile when Call Utilities configuration is invalid
      • Fixed clients being unable to connect to wireless AP when multi AP configuration is empty
      • Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
    • Services
      • Fixed incorrect mobile data usage provided to RMS service
    • System
      • Fixed an issue on bootloader web recovery hanging with certain firmware sizes

TCR1_R_00.07.04.2 | 2023.04.18

  • New
    • nftables support
  • Improvement
    • Network
      • Added PDP profile registry and LTE SMS format functions & management for the Verizon network
      • Improved SIM detection algorithm
      • Improved Multi-APN connection establishment time
    • WebUI
      • Improved Overview page performance
    • System
      • Changed hostname to router name
      • Updated OpenSSL to version 1.1.1t
      • Updated CA certificates to version 20211016
      • Updated libiwinfo to version 2022-08-19
  • Fix
    • Network
      • Fixed IPv4, IPv6 mobile connection restarts
      • Fixed operator scanning when mobile interface is disabled
      • Fixed data limit and tracking when software flow offloading is enabled
      • Added network reload call before bringing the mobile interface up
      • Fixed Port-based VLAN ID calculation issue
      • Fixed PDP context authentication when using special characters
    • Services
      • Fixed event text for configurable inputs/outputs on I/O Juggler
      • Fixed I/O PIN3 value not changing via MODBUS TCP
      • Added I/O status request error handling in various WebUI pages when the I/O service is booting up
      • Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
      • Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
      • Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
      • Fixed OpenVPN keep alive setting migration issue
      • Fixed PPTP server name setting migration issue
      • Fixed missing WebUI issue caused by Email Relay installation
      • Fixed NTP's Operator Station Synchronization memory leak issue
      • Fixed test email validation
    • System
      • Fixed libcares vulnerability CVE-2022-4904
      • Fixed frr vulnerability CVE-2022-37035
      • Removed ability for non root users to edit scripts that get executed as root

TCR1_R_00.07.04.1 | 2023.03.24

  • Fix
    • Network
      • Fixed Data Limit issue

TCR1_R_00.07.04 | 2023.03.07

  • Improvements
    • WebUI
      • Improved data persistence between page refreshes
      • Improved page navigation behavior
      • Improved redirect logic to open configuration edit modals
      • Updated the 'Status -> Mobile' page
      • Updated interface card in the Overview page
      • Separated Sent and Received data bars on the chart in the Mobile Usage page
    • Network
      • Added an info message displayed when a faulty SIM card is inserted
      • Added ResIOT operator's APNs to the APN database
      • Improved mobile connection re-establishment after reboot
      • Improved mobile connection recovery in cases where it was lost unexpectedly
      • Improved 'Deny data roaming' operation when switching between operators
      • Changed default WiFi AP cipher to CCMP (AES)
      • Added the logging of MAC addresses rejected by a WiFi AP
    • Services
      • Added MQTT support to I/O Juggler
      • Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
      • Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
      • Added argument support for the 'Execute custom script' SMS rule
      • Added a frequency option 'schedule' Modbus Master
      • Added pagination to Events Reporting overview
      • Added limit to Events Reporting rule list
      • Added email logging for Events reporting
      • 'Sync with browser' button in the NTP page now also synchronizes the time zone
      • Added a limit of 30 for NTP instances
      • Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
      • Added "make before break" option to IPsec configuration
      • Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
      • Improved MODBUS Master connection handling to reduce connection count
      • Updated modbus request error messages
      • Added OpenVPN server ip block support
      • Added MQTT support for MODBUS Master alarms
      • Added the possibility to get the device's Ethernet port data via SNMP
    • System
      • Updated bash to version 5.1.16
      • Added detailed FW update failure error message to Events Log
      • Improved firmware upload/validation error messages
      • Updated Turkish language support
      • Added protocol column to IP block page
      • Added "vpns.log" file to the Troubleshoot package
      • Added Wireguard tunnel information to the Troubleshoot package
      • Updated default admin group access rights
      • Updated DFOTA notification to show "More info" only when the update is forced
  • Fix
    • WebUI
      • Fixed MAC address showing on mobile interfaces
      • Fixed mobile cell ID displaying in hexadecimal
      • Fixed mobile data limit card creation in the Overview page
      • Fixed modem widget disappearing from the Overview page
      • Fixed Services page not displaying data after Thingworx package is installed
    • Network
      • Fixed interface priority change issue
      • Fixed a Custom Firewall Rule editing issue
      • Fixed DMZ configuration saving while it is disabled
      • Fixed Port Scan script execution failure
      • Fixed Firewall zone duplication issue
      • Fixed call function when VoLTE is disabled
      • Fixed VoLTE control when IMS is not enabled
      • Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
      • Fixed APN authentication when using empty credentials
      • Fixed manual APN selection from list
      • Fixed disabled WiFi interface after factory reset
      • Fixed WiFi interface creation with SAE mixed encryption
    • Services
      • Fixed I/O Scheduler overlapping instances issue
      • Fixed Input/Output image pin colors
      • Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
      • Fixed WiFi Hotspot landing page uploaded theme image display
      • Fixed WiFi Hotspot trial user deletion issue
      • Fixed WiFi Hotspot service crash when associated WiFi interface is not up
      • Fixed WiFi Hotspot password request by SMS
      • Fixed WiFi Scanner starting process when the WiFi interface is disabled
      • Added limitations on message size and quantity of email messages in Email to SMS
      • Fixed SMTP HELLO value parsing issue
      • Fixed SMS message window reset button
      • Fixed not being able to save empty 'Message text' field in Auto Reply
      • Fixed multi-part SMS concatenation
      • Fixed multi-part SMS processing
      • Fixed SMS error message on 'Mobile Data Reset' action
      • Fixed Data To Server JSON format %n, %N and %s flag issues
      • Fixed Events Reporting email data clean
      • Fixed Events Reporting missing config selections
      • Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
      • Fixed IPsec instance deletion after removing DMVPN package
      • Fixed IPSec migration via Backup file when DMVPN is configured
      • Fixed IPsec naming issue when the includes an equals sign
      • Fixed L2TP client to use correct interface on failover events
      • Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
      • Fixed MODBUS database size limiting issue
      • Fixed MODBUS MQTT Gateway client ID input
      • Fixed MODBUS TCP Slave RSSI value
      • Fixed MODBUS test button returning errors when several non-connected devices are configured
      • Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
      • Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
      • Fixed OpenVPN Static Key configuration saving by making Static key upload required
      • Fixed OpenVPN TLS client creation issue while LAN is down
      • Fixed Package Manager displaying non-existent packages
      • Fixed Package Manager errors showing up after successful installations
      • Fixed Periodic Reboot entry duplication after a power cycle
      • Fixed PPTP 'Client to client' option not being applied after save
      • Fixed receiving excessive device state emails after a reboot is initialized over RMS
      • Fixed WebUI unavailability after unsuccessful package install
    • System
      • Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
      • Fixed bash vulnerability CVE-2022-3715
      • Fixed CGI-IO file download vulnerability CVE-2022-38333
      • Fixed libxml2 vulnerability CVE-2022-40304
      • Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
      • Improved file upload logic
      • Fixed GPL firmware compilation with selected Tinc package
      • Fixed OpenVPN Static Key migration via keep settings issue
      • Fixed NTP time zone name setting migration when the name contains whitespaces
      • Fixed language setting issue
      • Fixed integer validation on industrial services
      • Fixed LED indications when PDP type is IPv6
      • Fixed issues with PDP type and SMS limit period migration via keep settings

TCR1_R_00.07.03.4 | 2023.02.09

  • Fix
    • Network
      • Changed generic modem restart method
      • Fixed mobile page VoLTE switching issues
    • Services
      • Sanitized tcpdump storage location
    • System
      • Fixed CVE-2023-32349 vulnerability

TCR1_R_00.07.03.3 | 2023.01.25

  • Fix
    • Network
      • Fixed disabled WiFi interface after factory reset

TCR1_R_00.07.03.2 | 2023.01.13

  • New
    • System
      • Japanese language
  • Improvements
    • Network
      • Optimized mobile netifd script installation
  • Fix
    • Network
      • Shortened modem hang monitor timeout
      • Fixed VLAN option setting when changing VLAN ID

TCR1_R_00.07.03.1 | 2023.01.03

  • Improvements
    • System
      • Remove front-end certificate validation
    • Network
      • Optimized mobile netifd script installation
  • Fix
    • Network
      • Fixed modem communication validation
      • Fixed connection establishment in IPv6 only mode
    • Services
      • Fixed libxml2 vulnerability CVE-2022-40303
      • Fixed an IPsec Phase one & two setting migration issue
    • System
      • Fixed JSON key parsing; keys can now be any printable character sequence
      • Fixed memory leak in 'session' module
    • WebUI
      • Fixed file pretty name parsing

TCR1_R_00.07.03 | 2022.12.16

  • New
    • Network
      • Firewall DMZ page
    • Services
      • Java package
      • SFTP server support
      • OPC UA client
      • Hotspot registered users management page
    • System
      • Portuguese language
      • Spanish language
      • Turkish language
      • Email Relay package
    • WebUI
      • New Web menu design
  • Improvements
    • Network
      • Updated modem handling, attachment, tracking and connection establishment processes
      • Added the possibility to select multiple ports in all firewall port fields
      • Added 'Match' traffic by type option to firewall traffic rules
      • Added DNS servers and routing table fields to the Wireguard page
      • Improved generating network topology
      • Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
      • Update Firewall Traffic Rules page with DSCP and MARK options
      • Added keepalive, holdtime and connect timers to BGP configuration
      • Added 'Use gateway metric' to network protocols web interface
      • Added more DHCPv6 client events to system log
      • Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
      • Added option to select subnet parameters in mobile Passthrough/Bridge modes
      • Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
      • Added mobile connection state for IPv6
      • Added wget tracking method to WAN Failover
      • Added interface checks to remove inaccurate Failover events from the Event Log
    • Services
      • Added CSP headers to Hotspot Landing Page
      • Added hotspot user script validation
      • Improved logging of disconnecting client devices
      • Added execute custom script SMS Utilities rule
      • Added receiver and transceiver mode support to SMPP
      • Added timezone synchronization with GSM operator option to NTP Client
      • Updated Zerotier web interface
      • Added IPsec Flush connection option on tunnel initialization
      • Added MODBUS slave regfile validation
      • Added delay, number of timeouts, always reconnect options to MODBUS Master service
      • Added DMVPN Phase 2 and Phase 3 support
      • Added synchronization counting to NTP client
      • Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
      • Added 'Unregister' button to RMS page
      • Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
      • Updated Zerotier package to version 1.10.1
      • Added automatic package removal upon failed installation in Package Manager
      • Added option to describe custom routing table and MTU auto counting to Wireguard VPN
      • Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
      • Updated sqm-scripts to version 1.5.1
      • Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
      • Added monthly reboot option to periodic reboot function
      • Added support for multiple custom option selection to SSTP configuration
      • Added PKCS12 certificate chain support to OpenVPN
      • Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
      • Added QoS selection to MQTT Modbus Gateway
      • Improved RAM usage during upload and installation of packages via Package Manager
      • Updated curl to version 7.86.0
      • Added brute-force prevention measures to Post/Get
      • Added automatic private and public key generation to Wireguard VPN
      • Added multiple Remote source IP support to IPsec
      • Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
      • Added functionality to rotate log file when log is saved to Flash memory
      • Improved performance while fetching packages on repeat visits to the Package Manager page
    • System
      • Added a 'test mail' button to the Administration -> Recipients page
      • Added option to clear blocked IPs in the Access Control page after reboot
      • Updated Web Request-Response core logic
      • Added certificate validation to all services that support certificate upload
      • Updated URL protocol validations
      • Removed profile update requests during Save & apply
      • Optimized profile switching logic
    • WebUI
      • Added an indication to the Interfaces page that displays when data limit is enabled
      • Added bootloader version to the Device section in the System page
      • Added configuration page shortcuts to Overview page widgets
      • Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
      • Updated network interfaces protocols web interface
      • Updated 404 page to include navigation menu
  • Fix
    • Network
      • Fixed jumbo frames MTU issue
      • Added the 'Any' choice to source & destination IP address field in NAT rule edit
      • Fixed NHRP web interface issues
      • Fixed WAN interface configuration interfering with LAN
      • Fixed mdcollect memory leak issue
      • Fixed data limit not resetting properly
      • Fixed incorrect mobile data usage calculations for multiple day periods
      • Fixed an Auto APN 'Keep settings' issue
      • Fixed data counting after mobile data limit has been reached
      • Fixed mobile band not setting correctly on first try
      • Fixed incorrect data limit conditions causing unwanted SIM switches
      • Fixed Passthrough DHCP lease time setting
      • Fixed mobile bridge mode issue when no DNS servers are supplied
      • Added new Operator Lists instance name validations
      • Added individual WiFi toggle support
      • Added error message when DFS channel is selected during scanning
      • Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
      • Fixed wireless interfaces connections not reestablishing after disabling & enabling again
      • Updated DFS radar detection patterns for Japan
      • Fixed Wired WAN connectivity issue when Failover interfaces are disabled
      • Fixed Failover fallback issue
    • Services
      • Fixed an SMS rule Save and Apply issue
      • Fixed Hotspot connected user list maximum upload/download value limits
      • Fixed incorrect connected Hotspot user information in RMS JSON
      • Removed unnecessary field from the Port Mirroring page
      • Fixed Hotspot issues related to specific connected phones
      • Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
      • Fixed WiFi Scanner hostname validation issues
      • Implemented Hotspot 'forget' method, which removes user from DB by MAC
      • Fixed UCI SMS Rule return message to display new changes
      • Fixed DNP3 issues when asking for modem temperature
      • Fixed base64 encoding of SMS messages when forwarding to HTTP
      • Fixed SMS sending issues when using multiple APN
      • Added Gateway modem option to IP Block and WoL in SMS Rule edit
      • Fixed unblocking IP addresses with an SMS message
      • Fixed Mobile Utilities page not load properly on some occasions
      • Fixed dbus vulnerability CVE-2020-35512
      • Fixed dnsmasq vulnerability CVE-2022-0934
      • Fixed ext4 vulnerability CVE-2021-3428
      • Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
      • Fixed libxm12 vulnerability CVE-2022-29824
      • Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
      • Fixed MQTT DoS vulnerability CVE-2021-41039
      • Fixed privoxy vulnerability CVE-2021-44542
      • Fixed python3 vulnerability CVE-2022-42919
      • Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
      • Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
      • Fixed CVE-2023-32350 vulnerability
      • Fixed switching between RMS connection types while the device is unregistered
      • Fixed reload issues in website blocking feature
      • Fixed IPsec PSK secret required field validation
      • Fixed bandwidth limiting after QoS is enabled for the first time
      • Fixed Dropbear issues when logging in over IPv6
      • Fixed Modbus status in Status -> Services page
      • Fixed Azure IoT Hub application issues when sending large volumes of data
      • Fixed Azure IoT Hub MQTT password validation
      • Fixed DMVPN configuration migration issue
      • Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
      • Fixed DMVPN IPsec connection issue
      • Fixed DMVPN mobile interface 'Keep settings' migration issue
      • Fixed Dynamic DNS long hostname text display issue
      • Fixed Events Reporting memory leak issue
      • Fixed Events Reporting not triggering after flipping an I/O slider
      • Fixed FOTA cron job not starting after factory reset
      • Fixed IPsec local firewall option parsing
      • Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
      • Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
      • Fixed NTP pool hostname validation
      • Fixed OpenVPN certificate remove with Static key and TLS authentication methods
      • Fixed OpenVPN configuration saving issue when using HMAC key authentication
      • Fixed OpenVPN custom dev name transformation to correct format
      • Fixed OpenVPN device name setting logic when uploading config from file
      • Fixed OpenVPN instance status display
      • Fixed OpenVPN TAP (bridged) configuration detection
      • Fixed Qos configuration saving issue occurring after instance deletion
      • Fixed RMS JSON incorrect WAN state and IP information
      • Fixed RMS step access issue in the Setup Wizard page
      • Fixed SNMP issues after reboot while using a Hotspot
      • Fixed SNMP generating MIB files for devices in accordance with to their hardware
      • Fixed SNMP traps not working after SNMP is installed from server
      • Fixed SSTP client route creation issue
      • Fixed UPNP secure mode not turning off issue
      • Fixed Wireguard route to endpoint issue
      • Fixed manual package installation for queued packages
      • Fixed NAT Rules dependency from IPsec web instance
      • Returned usleep utility
      • Updated Australian and South African NordVPN server IP addresses
    • System
      • Fixed certificate signing issues
      • Fixed Telnet, CLI access blocking after max invalid tries
      • Fixed FW upgrade with 'Keep settings' while low free space is available
      • Fixed backup file duplication issue
      • Fixed network device handling in system
    • WebUI
      • Fixed Hotspot interface display
      • Fixed side widget accessibility during first login
      • Fixed file upload issues
      • Fixed drag and drop issue in the Traffic Rules page
      • Fixed protocol display in the overview of the Interfaces page
      • Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
      • Fixed login errors after browser tab restoration
      • Fixed redirect to newly set IP address after Interface configuration
      • Fixed firmware upgrade verify spinner not closing
      • Fixed an issue with file upload via drag and drop

TCR1_R_00.07.02.7 | 2022.09.12

  • Improvements:
    • Improved manual-auto connection mode
  • Fixes
    • Fixed AT command for SMS storage usage
    • Fixed CVE-2022-1012 memory leak vulnerability
    • Fixed CVE-2022-37434 kernel vulnerability
    • Fixed interface option reset after VLAN ID change
    • Removed memory leak on port
    • Fixed WiFi Scanner out of range crash when iterating collected data

TCR1_R_00.07.02.6 | 2022.08.24

  • Improvements:
    • Added 'home.vodafone.de' APN
    • Improved stability of device information storage
  • Fixes:
    • Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
    • Fixed VoLTE management
    • Fixed OpenVPN tls-auth and tls-crypt option names

TCR1_R_00.07.02.5 | 2022.08.12

  • Improvements:
    • Updated curl to version 7.83.1
    • Updated firmware validation error messages
    • Added multiple source IP address support to the Port Forwards page
    • Increased custom APN Username & Password field maximum length to 64 symbols
    • Added auto switch to modem's SMS storage when SIM card storage doesn't exist
    • Improved mobile connection status handling
    • Added CSP headers Hotspot WebUI landing page
  • Fixes:
    • Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
    • Fixed CVE-2022-30065 busybox vulnerability
    • Fixed file upload path traversal
    • Removed Data to Server limit to proccess less than 10 instances
    • Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
    • Fixed OpenVPN dev setting logic
    • Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
    • Fixed MAC and leasetime setting for Bridge & Passthrough modes
    • Fixed modal tabs navigation when editing wireless interface with non-english languages
    • Fixed POST/GET output state being high after first request

TCR1_R_00.07.02.4 | 2022.07.20

  • Improvements:
    • Added default password change warning message before firmware downgrade
    • Extended time period for device to make connection to operator
    • Reduced the number of modem reboots when changing mobile settings
    • Reduced excessive log output when no SIM card is inserted
    • Added modem restart prevention on modem init
    • Added disable RPLMN option in the SIM section of the SIM card config
  • Fixes:
    • Fixed CVE-2022-2068 vulnerability
    • Disabled autoconnect on stop-network call
    • Fixed Hotspot login via landing page issue
    • Added firmware compatibility check

TCR1_R_00.07.02.2 | 2022.06.27

  • Improvements:
    • Updated FSTools package to version 2022-05-03
    • Added security headers to web requests
    • Added ping to DNS IPv6 support
    • Added modem reset to default state after device FW upgrade
    • Modem init now checks NVRAM sensitive commands before setting
    • GSM output was made consistent
  • Fixes:
    • Fixed CVE-2019-12900 libbz2 vulnerability
    • Fixed CVE-2022-23303 hostapd vulnerability
    • Fixed CVE-2022-29581 Linux kernel vulnerability
    • Fixed CVE-2022-29458 ncurses vulnerability
    • Fixed CVE-2022-1292 c_rehash script command injection vulnerability
    • Fixed behavior of some gsmctl commands
    • Fixed band locking issue
    • Fixed race condition for wireless configuration initialization

TCR1_R_00.07.02.1 | 2022.06.06

  • Improvements:
    • Improved GSM related messages in Troubleshoot logs
  • Fixes:
    • Fixed default mobile network configuration generation
    • Fixed MODBUS write requests and Mobile Utils option setting

TCR1_R_00.07.02 | 2022.05.23

  • New features
    • Overview side widget
    • IGMP Proxy
    • Privileged Access Management (PAM)
    • AWS Greengrass support
    • HTTPS certificate and key upload feature
    • SSH public keys edit box
    • License page
    • DNP3 data for Data to Server
  • Improvements
    • Updated busybox to version: 1.34.1
    • Updated curl to version 7.79.1
    • Added iptables filter package for string filtering
    • Added CHAP authentication for L2TP VPN
    • Added IPv6 support for L2TPv3 VPN
    • Added EAP-MSCHAPV2 authentication method for IPsec VPN
    • Added IPv6 support to Auto Reboot
    • Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
    • Updated SNMP version 5.9.1
    • Added OpenSSL authentication options to SNMPv3
    • Added support for OSPF redistribution options and OSPF neighbors
    • Added password field to BGP Peers page
    • Extended BGP "AS" field validation to accept integers up to 4294967295
    • Added "DHE+RSA" to OpenVPN cipher selections
    • Increased OpenVPN max password length from 128 bytes to 512 bytes
    • Made HMAC key direction initial value dependent on the role of the instance (client or server)
    • Made HMAC key and HMAC authentication key upload fields required
    • Added DES to IPsec encryption algorithms selections
    • Added special character support for CHAP secrets
    • Added validation requirements for PPTP user list username field
    • Added option to manually enter Public key in Wireguard configuration
    • Made generating Wireguard keys possible only while in auto mode
    • Added Events Log database to troubleshoot archive
    • Added RFC1918 filter field
    • Added the possibility to unblock multiple blocked devices at once
    • Added 'Port' column to blocked login attempts table
    • Added Speedtest server refresh
    • Updated Speedtest server list
    • Added asterisk option to Site Blocking
    • Added MD5 and SHA256 checksums to package validation page
    • Changed certificate requirements to only require client key file if client certificate is used
    • Added pagination and data retention between table pages
    • Added pagination functionality to tables when there are more than 10 records
    • Improved table sorting by saving user provided sort settings in the browser
    • Improved drag and drop functionality
    • Added the possibility to drag and drop files onto upload components
    • Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
    • Added 'Strict-Transport-Security' response header for HTTPS
    • Added 'breadcrumbs' to modal windows
    • Improved initial WebUI loading after login
    • Added mobile bytes sent and bytes received SNMP OIDs
    • Added mobile LED turn off feature ('System -> Administration' page)
    • Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
    • Updated mobile usage data point calculation logic
    • Added the possibility to manually enter operator number
    • Improved obtain mobile cell ID process
    • Added modem restart if SIM card is removed during APN database fetching process
    • Added unauthorized call logging
    • Added space character support in SMS commands
    • Disabled SMS modem storage configuration form when SIM is not inserted
    • Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
    • Added external modem SMS limit Overview card and widget
    • Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
    • Added duplicate value check for list configuration options
    • Changed mobile card instance design
    • Fixed 'Mobile Data usage reset' SMS rule
    • Fixed the default state parameter of SMS list POST/GET command
    • Added Hotspot configuration profiles
    • Added local Hotspot user password hashing
    • Added Hotspot password encoding option
    • Improved Hotspot related firewall rule setting
    • Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
    • Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
    • Added ubus support to Hotspot
    • Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
    • Added I/O SNMP trap
    • Added ISO 8601 time format to I/O Juggler's '%ts' parameter
    • Added device name parameter '%pc' to I/O Juggler
    • Added PPPoE VLAN priority support
    • Made VRRP ping section dependent on main instance
    • Added 'WAN to LAN' switch
  • Fixes
    • Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
    • Fixed CVE-2022-28391 busybox vulnerability
    • Fixed CVE-2018-16789 shellinabox vulnerability
    • Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
    • Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
    • Fixed zlib backport security issue
    • Fixed Wireguard firewall zone assignment
    • Fixed queued packages disappearing from list after FW upgrade with keep settings
    • Fixed error message display for multiple input validation rules
    • Fixed incorrect DHCP validation range for start and limit fields
    • Removed 'Bring up on boot' option from network interface configuration pages
    • Fixed coma-separated DHCP options disappearing after save
    • Fixed exclude and listen interfaces
    • Fixed 'Use broadcast flag' option saving
    • Fixed firewall zone assignment when creating new interfaces
    • Fixed OpenVPN 'Netmask' and 'IP address' field validations
    • Fixed OpenVPN TAP configuration saving issue
    • Fixed OpenVPN switching to TUN mode when uploading a configuration from file
    • Fixed dynamic BGP route state display
    • Fixed BGP peer enable in edit page
    • Fixed issue when no L2TP client instance could be bound to IPsec
    • Fixed firewall rule and zone behavior related to config section creation
    • Added default value for L2TPv3 netmask, which is now written to config after save
    • Fixed passthrough option saving to IPsec file
    • Fixed DMVPN issue where instance configuration could not be saved
    • Fixed Wireguard peer could not be saved issue
    • Fixed NTP client time synchronization after factory reset
    • Fixed device time display with selected time zone
    • Fixed MODBUS TCP indexation missing bracket issue
    • SMS Utilities: enhanced service security
    • Fixed initial MODBUS TCP request count validation
    • Fixed PIN 3/4 direction switching over MODBUS TCP
    • Fixed MODBUS data to MQTT socket closing issue when connection fails
    • Fixed MODBUS alarm configuration deletion
    • Fixed DNP3 master not working after FW upgrade with 'keep settings'
    • Fixed DNP outstation not returning error messages
    • Added missing SNMP objects: mobile IP, data sent/received today
    • Fixed MQTT Publisher 'Remote address' field validation
    • Fixed long interface name support for Azure IoT Hub
    • Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
    • Fixed missing sent/received data issue
    • Fixed URL input field length validation
    • Fixed admin login issue after upload of backup from a device with older firmware versions
    • Fixed MAC address formatting in Events reporting messages
    • Fixed Events reporting DHCP lease message spam, when no new lease is added
    • Fixed logging crashing after downloading Troubleshoot file
    • Made Wake on LAN visible only on devices with Ethernet ports
    • Fixed Traffic log file transfer to FTP server
    • Fixed Web Filter service reloading after a host list file is uploaded
    • Fixed access denied messages when sending JSON-RPC requests from root user
    • Fixed error message display about duplicated intervals in Profile scheduler
    • Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
    • Corrected OSPF Routing card values, value positions and names
    • Fixed global secret instances not being removed when there are no IPsec instances
    • Fixed uploaded file remove icon not staying in position on hover
    • Fixed Overview card collapse issue that made it unresponsive after too many clicks
    • Removed WAN6 interface from the Overview page
    • Fixed mobile IPv6 display in Events Reporting status messages
    • Fixed Bridge mode when DNS2 is not available
    • Fixed PAP/CHAP username and password fields not saving in interface edit window
    • Fixed sending email without secure connection for providers that support such an option
    • Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
    • Fixed Call Utilities Events Log message for reboot rule
    • Fixed SMS command validation for no-authorization option
    • Fixed MODBUS SMS alarms 'Enable' option saving
    • Fixed running RMS with no SIM card inserted issue
    • Fixed firmware available on server version checking issue
    • Fixed CVE-2020-15078 openvpn vulnerability
    • Fixed storage calculation for packages
    • SMS Utilities: enhanced service security
    • Fixed firmware deletion after leaving the page
    • Fixed setup wizard redirect after LAN IP change
    • Fixed various validation bugs, typos, option hints & alignments
    • Fixed multiple IPv6 configuration field validations
    • Added multiwan support for Wireguard default route
    • Fixed wireless signal strength display when no clients are connected
    • Fixed loss of connectivity for clients when router is in STA+AP mode
    • Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
    • Fixed Wifi Scanner data not being stored in certain scenarios
    • Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
    • Fixed Hotspot user group limit not resetting on specified time
    • Removed an RMS error message when no Hotspot users were created
    • Fixed Hotspot landing page image upload issue
    • Fixed issue that prevents saving Guest Network configuration changes

TCR1_R_00.07.01.4 | 2022.02.25

Note: Firmware version TCR1_R_00.07.01.4 released on 2022.02.25 was removed due to an issue with improper firmware validation.

  • Improvements
    • Increased Port Forwards rule max name length
  • Fixes
    • Added missing bracket to the end of MODBUS messages
    • Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
    • Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
    • Fixed firewall extra option validation
    • Fixed Hotspot enable button validation
    • Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
    • Changed the logic of uploading files to the modem
    • Fixed OpenVPN server configuration with password authentication
    • Fixed NTP interval length validation
    • Fixed network interface enable after Drag & Drop
    • Updated NTP client interval to 24h
    • Fixed connection to whitelist carriers
    • Fixed Passthrough mode when DHCP is disabled
    • Fixed 'Deny data roaming' feature
    • Fixed mobile blocking dependency on region
    • Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

TCR1_R_00.07.01.2 | 2022.01.04

Note: Firmware version TCR1_R_00.07.01.2 released on 2022.01.04 was removed due to an issue with improper firmware validation.

  • New features
    • DFOTA modem upgrade system for Quectel modems
  • Improvements
    • Removed L2TP section title prefixes
  • Fixes
    • Fixed IPSec crashing issue using mobile
    • Fixed FW flashing when chip is in unknown state
    • Fixed CPU usage percentage display in the Overview page
    • Fixed FOTA timeout issue when server does not respond
    • Fixed installation of backup packages
    • Fixed mobile data limit display after profile change
    • Fixed Bridge mode without multi-APN
    • Fixed multi mobile interface checking
    • Fixed error handling when the modem is not responding
    • Prolonged autoconnect setting timeout

TCR1_R_00.07.01 | 2021.11.18

Note: Firmware version RUTX_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.


  • New features
    • Initial TCR100 Firmware