Difference between revisions of "TRB140 Logs"

From Teltonika Networks Wiki
 
Line 1: Line 1:
 
{{Template: Networking_rutos_manual_logs
 
{{Template: Networking_rutos_manual_logs
| name       = TRB140
+
<!------------------------DEVICE----------------------->
| series     = TRB14X
+
| name   = TRB140
 +
| series = TRB1
 +
<!----------------------SEPARATORS--------------------->
 +
| traffic = 1
 +
| hotspot = 0
 
}}
 
}}

Latest revision as of 14:00, 24 August 2020

Main Page > TRB Gateways > TRB140 > TRB140 Manual > TRB140 WebUI > TRB140 Status section > TRB140 Logs

The information in this page is updated in accordance with firmware version TRB1_R_00.07.00.

Summary

The Logs section contains information on various device related events. This article is an overview of the Logs section for TRB140 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking trb1 manual webui basic advanced mode.gif

Events Log

The Events Log section contains a chronological list of various events related to the device. The figure below is an example of the Events Log page:

Networking rutos manual logs events log.png

Traffic Log

The Traffic Log section displays traffic which goes through one of the WAN interfaces. The device does collect data for the Traffic Log by default. To see Traffic Log information you must first enable Traffic Logging from the Network → Traffic Logging page.

The figure below is an example of the Traffic Log.

Networking rutos manual logs traffic log.png