Difference between revisions of "TRB140 Mobile Utilities"

From Teltonika Networks Wiki
Line 50: Line 50:
 
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable SMS reboot function</td><td>Allows router restart via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''reboot'''</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>TCP port used for Modbus communications.</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS:
 
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable SMS reboot function</td><td>Allows router restart via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''reboot'''</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>TCP port used for Modbus communications.</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS:
 
Data state, Operator, Connection type, Signal Strength, Connection State, IP
 
Data state, Operator, Connection type, Signal Strength, Connection State, IP
</td><td>You can select which status elements to display</td></tr><tr><td>Get status via SMS after reboot</td><td>Check this to receive connection status via SMS after the reboot</td><td>If checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the '''Send status SMS to other number''' field will become available</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use</td><td>Possible values:
+
</td><td>You can select which status elements to display</td></tr><tr><td>Get status via SMS after reboot</td><td>Check this to receive connection status via SMS after the reboot</td><td>If checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the '''Send status SMS to other number''' field will become available</td></tr><tr><td>Send status SMS to other number</td><td>Enable this if you want the status message to be sent to another (other than the sender) number (s)</td><td>If this is checked, you will be prompted to enter a phone number (s)</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use</td><td>Possible values:
 
No authorization | By serial | By router admin password; Default: '''By router admin password'''
 
No authorization | By serial | By router admin password; Default: '''By router admin password'''
 
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
 
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
Line 56: Line 56:
 
</td></table>
 
</td></table>
 
====Status====
 
====Status====
----
+
----<br /><table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This check box will enable or disable SMS status function</td><td>Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''status'''</td></tr><tr><td>Send status SMS to other number</td><td>Enable this if you want the status message to be sent to another (other than the sender) number (s)</td><td>If this is checked, you will be prompted to enter a phone number (s)</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS:
{| class="wikitable"
+
Data state, Operator, Connection type, Signal Strength, Connection State, IP
|+
+
</td><td>You can select which status elements to display</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |FIELD NAME
+
No authorization | By serial | By router admin password; Default: '''By router admin password'''
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |DESCRIPTION
+
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |EXPLANATION, NOTES
 
|-
 
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Enable
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |This check box will enable or disable SMS status function
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
 
|-
 
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Action
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |The action to be performed when this rule is met
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
 
|-
 
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |SMS text
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |SMS text that will trigger the rule
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''status'''
 
|-
 
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Allowed users
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |White list of allowed users
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Possible values:
 
 
From all numbers | From group | From single number; Default: '''From all numbers'''
 
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
+
</td></table>
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Send status SMS to other number
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Enable this if you want the status message to be sent to another (other than the sender) number (s)
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |If this is checked, you will be prompted to enter a phone number (s)
 
|-
 
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Authorization method
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |What kind of authorization to use for SIM management
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Possible values:
 
No authorization | By serial | By router admin password; Default: '''By router admin password'''
 
|-
 
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Message text
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |Which status information should be included in SMS:
 
Data state, Operator, Connection type, Signal Strength, Connection State, IP
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |You can select which status elements to display
 
|-
 
|}
 
 
 
 
====Get I/O status====
 
====Get I/O status====
 
----
 
----

Revision as of 17:53, 26 November 2019

Main Page > TRB Gateways > TRB140 > TRB140 Manual > TRB140 WebUI > TRB140 Services section > TRB140 Mobile Utilities

Summary

TRB routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.

SMS Utilities

Default Rules


The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.

Networking trb manual mobile utilities sms rules v1.png

The entire list contains 12 rules but you are also be provided with the possibility to configure custom ones or edit the existing rules.

All default configuration options are listed below:

  • Reboot
  • Send_status
  • Mobile (on)
  • Mobile (off)
  • SSH_access
  • Web_access
  • Firstboot
  • Fw_upgrade
  • Uci
  • Gpio_direction
  • Gpio_state
  • Iostatus

Execution


To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text “reboot”, the router will reboot if the selected Authorization method is “No authorization”. However, if there is an Authorization method present you will need to include the “Authorization key” in the text message. This “Authorization key” depends on the chosen Authorization method, i.e., if the method is “By serial”, the “Authorization key” is the router’s serial number, if the method is “By router admin password”, the “Authorization key” is the router’s admin password. The "Authorization key” must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is “By router admin password” and the password is “admin01”, the entire message should look like this: “admin01 reboot”. The same applies to “By serial” authorization.

Rule Overview and editing


Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the Edit button next to any SMS Utilities rules. This section will contain information on editing every single SMS Utilities rule.

General settings


Networking trb manual mobile utilities reboot general settings v1.png

Authorization settings


File:Networking trb manual mobile utilities reboot Authorization settings v1.png

Above is an example of what SMS Configuration General and Authorization settings windows looks like, specifically, SMS Configuration for the Reboot rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

This field appears only if you have checked Get status via SMS after reboot

Reboot


FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable SMS reboot functionAllows router restart via SMS
ActionThe action to be performed when this rule is metSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: reboot
SMS textSMS text that will trigger the ruleTCP port used for Modbus communications.
Message textWhich status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

You can select which status elements to display
Get status via SMS after rebootCheck this to receive connection status via SMS after the rebootIf checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the Send status SMS to other number field will become available
Send status SMS to other numberEnable this if you want the status message to be sent to another (other than the sender) number (s)If this is checked, you will be prompted to enter a phone number (s)
Authorization methodWhat kind of authorization to usePossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Status



FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis check box will enable or disable SMS status functionAllows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
ActionThe action to be performed when this rule is metReturns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: status
Send status SMS to other numberEnable this if you want the status message to be sent to another (other than the sender) number (s)If this is checked, you will be prompted to enter a phone number (s)
Message textWhich status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

You can select which status elements to display
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Get I/O status


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable SMS I/O status function Allows you to get the router‘s I/O status via SMS
Action The action to be performed when this rule is met Returns an SMS message containing information about the Input/Output status of the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: iostatus
Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Send status SMS to other number Enable this if you want a status message to be sent to another (other than the sender) number (s) If this is checked, you will be prompted to enter a phone number (s)

Switch mobile data ON/OFF


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Switch mobile data function Allows mobile control via SMS
Action The action to be performed when this rule is met Turn mobile data ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;

Default text: mobileon to turn mobile data ON; mobileoff to turn mobile data OFF

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Write to config Permanently saves mobile network state With this setting enabled, the router will keep the new mobile data state even after reboot.

If it is not selected, the router will revert the mobile data state after reboot


SSH access Control


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the SSH access control function Allows SSH access control via SMS
Action The action to be performed when this rule is met Turns SSH access ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: ssh

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Enable SSH access Enables or Disables SSH access from LAN If this is checked, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
Enable remote SSH access Enables or Disables SSH access from WAN If this is checked, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN

  • Note that by default the ssh rule will enable both local and remote SSH access. You can change how the rule acts by clicking the "Edit" button located next to it:

Sms utilities ssh edit v2.png


  • In the next window you can customize whether the rule will turn local/remote SSH access ON or OFF:

Sms utilities ssh configuration v2.png


If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn SSH access ON and use the custom rule to turn SSH access OFF. You can create new SMS Utilities rules from the New SMS Rule section located at the bottom of the SMS Utilities page.

Web access Control


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Web access control function Allows Web access control via SMS
Action The action to be performed when this rule is met Turns access to WebUI ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: web

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Enable HTTP access Enables or Disables HTTP access from LAN If this is checked, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
Enable remote HTTP access Enables or Disables HTTP access from WAN If this is checked, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
Enable remote HTTPS access Enables or Disables HTTPs access from WAN If this is checked, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN

  • Note that by default the web rule will enable both local and remote HTTP access as well as remote HTTPS access. You can change how the rule acts by clicking the "Edit" button located next to it:

Sms utilities web edit v2.png


  • In the next window you can customize whether the rule will turn local/remote HTTP/HTTPS access ON or OFF:

Sms utilities web configuration v2.png


If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn HTTP/HTTPS access ON and use the custom rule to turn HTTP/HTTPS access OFF. You can create new SMS Utilities rules from the New SMS Rule section located at the bottom of the SMS Utilities page.

Restore to default


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Restore to default function Allows you to restore the router to its default settings via SMS
Action The action to be performed when this rule is met Executes a router Reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: restore

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Force FW upgrade from server


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the FW upgrade from server function Allows you to upgrade the router‘s FW via SMS
Action The action to be performed when this rule is met Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: fw_upgrade

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Switch output ON/OFF


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Switch output function Allows output control via SMS
Action The action to be performed when this rule is met Turns specified output ON or OFF
Active timeout Make the rule active for a specific time;

format: seconds

Example: if you configure a rule to turn a specific output on and set a 30 s timeout, the output will activate once the router receives the SMS messages and then it will deactivate after a period of 30 s
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: " "

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Output type Which output will be activated (RUT240 routers only have one output, so this value will always be Digital OC Output) Possible values:

Digital OC output | Relay output; Default: Digital OC output

NOTE: No default SMS text is provided for this rule. It can be created via the New SMS Rule tab.


UCI API rule


The UCI rule lets you set or get any parameter from the router's configuration files.

UCI API
FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the UCI API function Allows you to set or get any configurations from the router
Action The action to be performed when this rule is met. Sets or sends you any specified configurations of the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: uci

Detailed explanations on how to use this function are presented in the table below

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

The following are syntax examples for the UCI API rule:

UCI API syntax
SYNTAX DESCRIPTION DEFAULT MESSAGE EXAMPLE
uci get config.section.option" Returns config option value uci get network.wan.ipaddr - returns the router's WAN IP address
uci set config.section.option="value" Sets config option uci set wireless.wifi-iface.key="12345678" - sets WiFi interface's password to 12345678
uci show config Returns the contents of a config file uci show openvpn - returns the contents of the openvpn config file
uci show config.section Returns the exact part of a config file (either section or the exact option value) uci show network.ppp - returns the contents of the ppp interface section from the network config file

As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our UCI command usage article.

Custom Rules


If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the New SMS Rule tab. Select an Action and press the Add button located next to it.

Services sms utils new.PNG

Configuring a new rule is very similar to editing default rules: you are provided with a list of Actions, other fields are generated in accordance with which Action you choose.

Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

There is only one default rule (Reboot) configured and it is disabled. To make a new rule click the Edit button located next to the one default rule or make an entirely new entry for you Call Rules list by adding a rule from the New Call Rule tab.

Call Configuration


The Call Configuration window is similar to SMS Configuration, but less complex.

Services sms utils call.PNG

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable yes | no; Default: no Allows router's Call rules
Action Reboot | Send status | Send WiFi | Send mobile data | Send output; Default: Reboot The action to be performed when this rule is met
Allowed users From all numbers | From group | From single number; Default: From all numbers White list of allowed users
Get status via SMS after reboot yes | no; Default: no If checked, the router will send a status message once it has rebooted and is operational again
Message text string; Default: Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal Strenght - %ss; New FW available - %fs; Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

User Groups

User Groups provides you with the possibility to group phone numbers for SMS management purposes. You can then later use these groups in all related SMS and call functionalities. This option helps if there are several Users who should have the same roles when managing the router via SMS or calls. You can create a new user group by entering a name in the Group name text field and clicking the Add button located next to it in the Create New User Group section. After this you will re redirected get to the Modify User Group section.

Services sms utils user groups.PNG

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Group name string; Default: " " Name of the group of phone numbers. Used for easier management purposes
Phone number phone number; Default: " " Add numbers to the user group. Must match international format. You can add more phone number fields by clicking on the green (Services sms gateway auto reply plus symbol.PNG) symbol

SMS Management

With the help of the SMS Management window you can read and send SMS messages.

Read SMS


In the Read SMS tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.

Services sms utils read.PNG

Send SMS


The Send SMS tab lets you send SMS messages from the router‘s SIM card.

Services sms utils send.PNG

All you have to do is enter the recipient’s phone number, type in your message and hit the Send button. If everything went well, a green bar saying Message sent should appear (image below).

Services sms utils sent.PNG

Storage


The Storage tab shows you how much SIM card memory space is used and how much is still available. You can also chose the option for the router to not delete messages. If this option is not used, the router will automatically delete all incoming messages after they have been read. Message status read/unread is examined every 60 seconds. All read messages are deleted.

Services sms utils store.PNG

Statistics

The Statistics page represents information about sent and received SMS messages of both SIM cards. The counters can be reset by clicking the Reset button next to each SIM card.

File:Services sms utils statistics.PNG