TRB142 Firewall

From Teltonika Networks Wiki
Main Page > TRB Gateways > TRB142 > TRB142 Manual > TRB142 WebUI > TRB142 Network section > TRB142 Firewall

Summary

RutOS uses a standard Linux iptables package as its firewall, which uses routing chains and policies to facilitate control over inbound and outbound traffic. This chapter is an overview of the Firewall section.

General Settings

The General Settings tab is used to configure the main policies of the device's firewall. The figure below is an example of the General Settings section and the table below provides information on the fields contained in that section:

Trb142 webui network firewall general settings general settings v1.png

Template:Webui network firewall general settings table

Zones


Template:Webui network firewall general settings zones

Trb142 webui network firewall general settings zones v1.png

Template:Webui network firewall general settings zones table

Port Forwards

Template:Webui network firewall port forwards

Trb142 webui network firewall port forwards port forwards v2.png

Template:Webui network firewall port forwards table

Port Forwards: editing a rule


Template:Webui network firewall port forwards edit rule

Trb142 webui network firewall port forwards port forwards edit rule v1.png

Template:Webui network firewall port forwards edit rule table

Traffic Rules

Template:Webui network firewall traffic rules

Trb142 webui network firewall traffic rules v2.png

Template:Webui network firewall traffic rules table

Open ports on router


Trb142 webui network firewall traffic rules open ports on router v1.png

New forward rule


Trb142 webui network firewall traffic rules new forward rule v1.png

Traffic Rulles: editing a rule


Custom Rules

Template:Webui network firewall custom rules

Trb142 webui network firewall custom rules v2.png

Template:Webui network firewall custom rules table