TRB142 Mobile

From Teltonika Networks Wiki
Revision as of 08:10, 12 October 2018 by Dziugas (talk | contribs)

Main Page > TRB Gateways > TRB142 > TRB142 Manual > TRB142 WebUI > TRB142 Network section > TRB142 Mobile

Summary

Template:Webui network mobile summary

Mobile Configuration Options

Template:Webui network mobile mobile configuration options

Trb142 webui network mobile configuration options v1.png

FIELD NAME VALUE DESCRIPTION
PIN number string; Default: " " A personal identification number (PIN) is a numeric password used to authenticate a user to a system (in this case, the user to the SIM card)
APN string; Default: " " An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require to enter the APN just to complete the registration to a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract.
NOTE: an APN Network Identifier cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*"
Auth Mode CHAP | PAP | None; Default: None The Authentication method that your GSM carrier uses to authenticate new connections on its network
Username string; Default: " " The username used to connect to your carrier’s network. This field becomes available when you select an Auth Mode (i.e., the selected Auth Mode is not “None”)
Password string; Default: " " The password used to connect to your carrier’s network
Use Mobile operator DNS yes | no; Default: yes When checked, indicates that the connection will use DNS server's automatically provided by your operator