Difference between revisions of "TRB145 Custom Scripts"

From Teltonika Networks Wiki
(Created page with "__TOC__ ==Summary== {{Template: webui_system_user_scripts_summary}} ==Startup Script== {{Template: webui_system_user_scripts_startup_script}} File:Trb142 webui system us...")
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Template: Networking_rutos_manual_custom_scripts
| name  = TRB145
{{Template: webui_system_user_scripts_summary}}
| series = TRB1
==Startup Script==
{{Template: webui_system_user_scripts_startup_script}}
[[File:Trb142 webui system user scripts v1.png]]

Latest revision as of 06:38, 20 July 2021

Main Page > TRB Gateways > TRB145 > TRB145 Manual > TRB145 WebUI > TRB145 System section > TRB145 Custom Scripts

The information in this page is updated in accordance with firmware version TRB1_R_00.07.02.7.


The User Scripts function allows users to write their own shell scripts that will be executed during the device's booting process. This page is an overview of the User Scripts function in TRB145 devices.

Startup Script

The Startup Script section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's boot cycle. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the Startup Script management section:

Networking rutos manual custom scripts startup script.png