TRB145 Data to Server

From Teltonika Networks Wiki
Revision as of 08:30, 24 August 2020 by Dziugas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > TRB Gateways > TRB145 > TRB145 Manual > TRB145 WebUI > TRB145 Services section > TRB145 Data to Server

The information in this page is updated in accordance with firmware version TRB1_R_00.07.00.

Summary[edit source]

The Data to Server feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers.


If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking trb1 manual webui basic advanced mode.gif

Data Senders[edit source]

A Data Sender is an instance that gathers and periodically sends collected data to a specified server. The Data Senders list is empty by default so, in order to begin configuration you must add a new data sender first. To add a new data sender, click the 'Add' button.

Networking rutos manual data to server data senders add button.png

After this you should be redirected to the newly added data sender's configuration page.

Advanced Sender Settings[edit source]


Refer to the table below for descriptions on data sender configuration fields.

Note: these tables have coloring schemes to indicate which fields can be seen with different configuration.

Networking rutos manual data to server advanced sender settings.png

General[edit source]

Field Value Description
Enabled off | on; default: off Turns the data sender on or off.
Name string; default: none Name of the data sender. Used for easier data senders management purposes only (optional).
Data source Modbus data | DNP3*; default: Modbus data Source of the data to be sent to server.
Protocol HTTP(S) | MQTT* | Kinesis; default: HTTP(S) Protocol used for sending the data to server.
JSON format string; default: {"TS": "%t", "D": "%d", "data": %a} Arranges the format of the sent JSON segment.
Segment count integer [1..10]; default: 1 Max segment count in one JSON string sent to server.
Send as object off | on; default: off When turned on, sends JSON segment as object and not as an array element.
URL/Host/Connection string string; default: none URL for HTTP(S); Host for MQTT; Connection string for Azure MQTT.
Period integer [1..86400]; default: 60 Data sending frequency (in seconds).
Data filtering All data | By slave ID | By slave IP; default: All data If Data source: Modbus data. Choose which data this sender will send to server.
By slave ID: Slave ID integer [1..255]; default: none ID of the Modbus slave whose collected data will be sent to server.
By slave IP: Slave IP ip; default: none IP address of the Modbus slave whose collected data will be sent to server (for Modbus TCP slaves).
Data filtering All data | DNP3 Address | DNP3 IP; default: All data If Data source: DNP3. Choose which data this sender will send to server.
DNP3 Address: DNP3 Address integer [0..65519]; default: none DNP3 address of device whose collected data will be sent to server.
DNP3 IP: DNP3 IP ip | domain; default: none IP address of DNP3 device whose collected data will be sent to server.
Retry on fail off | on; default: off When turned on, the data sender retries failed sending attempts until the are successfully delivered.


* This is additional software that can be installed from the Services → Package Manager page.

Protocol HTTP(S)[edit source]

Field Value Description
Custom Header string; default: none Allows to add custom headers to the HTTP requests.
Use TLS off | on; default: off Enables the use of TSL certificates.
On: TLS type Certificate based; default: Certificate based Select type of TLS.
On: CA File .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
On: Client Certificate .crt file; default: none Certificate file is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. If client certificate is not needed, leave both client certificate and client key fields empty.
On: Private Key .key file; default: none File containing private key for this client. This file needs to be not encrypted.


Protocol MQTT[edit source]

Field Value Description
Port integer [0..65535]; default: 1883 Port number for connecting to MQTT.
Keepalive integer [1..640]; default: 60 MQTT Keepalive period in seconds.
Topic string; default: none MQTT topic to be used for publishing the data.
Client ID string; default: none Client ID to send with the data. If empty, a random client ID will be generated
QoS integer [0..2]; default: 0 MQTT Quality of Service. Allowed values:
  • 0 - when we prefer that the message will not arrive at all rather than arrive twice,
  • 1 - when we want the message to arrive at least once but don't care if it arrives twice (or more),
  • 2 - when we want the message to arrive exactly once. A higher QoS value means a slower transfer.
Use TLS off | on; default: off Enables the use of TSL certificates.
On: TLS type Certificate based | Pre-shared key based; default: Certificate based Select type of TLS.
Certificate based: CA File .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
Certificate based: Client Certificate .crt file; default: none Certificate file is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. If client certificate is not needed, leave both client certificate and client key fields empty.
Certificate based: Private Key .key file; default: none File containing private key for this client. This file needs to be not encrypted.
Pre-shared key based: Pre-Shared-Key string; default: none The pre-shared-key in hex format with no leading "0x".
Pre-shared key based: Identity string; default: none The identity of this client. May be used as the username depending on the server settings.
Use Credentials off | on; default: off Enables use of username and password for authentication.
On: Username string; default: none Username used in authentication.
On: Password string; default: none Password used in authentication.


Protocol Kinesis[edit source]

Field Value Description
Stream name string; default: none The name of the stream for which to start encrypting records.
Partition key string; default: none The partition key is used by Kinesis Data Streams as input to a hash function that maps the partitionkey and associated data to a specific shard.
API version positive integer; default: none Optional. Used version of the Kinesis API.
Region string; default: none Region code of the Kinesis server.
Domain domain; default: none Domain of the Kinesis server. E.g. 'amazonaws.com'
Access key string; default: none Access key ID is a part of Access keys used for authentication.
Secret key string; default: none Secret access key is a part of Access keys used for authentication.
Use TLS off | on; default: off Enables the use of TSL certificates.
On: TLS type Certificate based; default: Certificate based Select type of TLS.
On: CA File .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
On: Client Certificate .crt file; default: none Certificate file is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. If client certificate is not needed, leave both client certificate and client key fields empty.
On: Private Key .key file; default: none File containing private key for this client. This file needs to be not encrypted.