TRB145 Firmware Downloads

From Teltonika Networks Wiki
Main Page > TRB Gateways > TRB145 > TRB145 Firmware Downloads

Important:

If you are using FW version TRB145X_R_00.01.06.1 or older on your TRB145 gateway, you will need to follow these instructions in order to successfully upgrade your device's FW to a later version.


This page contains firmware files for TRB145 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in TRB145 Firmware.

TRB145

File Type Release date Size MD5 Changelog
TRB1_R_00.07.06.8_WEBUI.bin Latest FW 2024.03.25 16.49 MB 03abb41dda73a6f247704190dce6f6d9 Link
TRB1_R_00.07.06.4_WEBUI.bin Mass production FW 2024.01.18 16.34 MB a1a712b866a20d7f21ff003cd835c44c Link
TRB1_R_GPL_00.07.06.8.tar.gz SDK 2024.03.25 27.3 MB 886f087a9a413c749571aef595e1a5b4


Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.


FW checksums


Checksums for firmware files can be found here.

Changelog

TRB1450_R_00.01.06.1 | 2019.12.19

  • New:
    • SMS Gateway POST/GET, Auto Reply, SMS Forwarding
    • net-snmp 5.8 support
    • Modbus TCP slave, TCP master, data to server
    • Firmware over the air support
    • Events log
    • Mobile data limit
    • SMS limit
    • Static routes
    • RMS status, action and connect SMS rules
    • SMS I/O status rule
    • Configuration Profiles
    • Auto-APN
  • Improvements:
    • WebUI style improvements
    • I/O POST/GET, Output Scheduler
    • Added specific LED blinking on firmware upgrade, device boot and mobile indication
    • Added password protected access shell
    • Changed GPIO direction and state SMS rules
  • Fixes:
    • Added default device name
    • Access control fixes
    • Fixed RMS download, upload and data sending while connecting

TRB1450_R_00.01.05 | 2019.09.30

  • New:
    • Firewall sync with upstream
  • Improvements:
    • Improved partition checking logic
  • Fixes:
    • Removed alsa-intf dependancy
    • Disabled DROP SSDP rules
    • Fixed invalid magic number message
    • Fixes for multiple APNs
    • Disabled MCM on full modem control over serial
    • Fixed Deny data roaming option setting wrong values
    • Fix not showing I/O (dwi, relay, input) content in certain devices

TRB1450_R_00.01.04.1 | 2019.08.02

  • Fixes:
    • Input/Output related fixes

TRB1450_R_00.01.04 | 2019.07.15

  • New features:
    • Added Input/Output configuration and overview page
    • Added I/O status managememt SMS Utilities rules

TRB1450_R_00.01.03 | 2019.06.14

  • New features:
    • Added System → Administration → Diagnostics page
    • Added deny roaming option
  • Improvements:
    • Updated WebUI notification box style
  • Fixes:
    • Renamed misleading RS485 echo label into full duplex
    • Status → System table style fix
    • Fixed reset mobile bytes received/sent counter after connection restart
    • Fixed IPsec connection after reboot
    • Fixed call utilities mobile turn off rule

TRB1450_R_00.01.02 | 2019.05.22

  • New features:
    • Added Profiles functionality
    • Added Modbus TCP functionality
    • Added MQTT broker and publisher support
    • Add L2TP support
    • Added PPTP support
    • Added GRE Tunnel support
  • Improvements:
    • Added output state keeping after device reboot
    • SDK: added sanitized Linux headers
    • Add LED indication when in fastboot mode
    • Enabled reset button to enter fastboot mode
  • Fixes:
    • Show valid output options when using bidirectional serial over IP type
    • Fixed reloading eth0 interface

TRB1450_R_00.01.01.2 | 2019.03.25

  • New features:
    • Added Mobile Utilities service
  • Improvements
    • Improved modem boot up speed
    • Improved modem compression ratio
    • Added requirement to change password on first boot
    • Disallow keep settings when flashing an older firmware
  • Fixes:
    • Firewall append config with reload option
    • Added OpenVPN certs removal on OpenVPN tunnel section deletion
    • Various fixes for OpenVPN page
    • Backup/keep-settings fixed to include OpenVPN certificates and tlt auth files
    • Backup/keep-settings ficed to preserve root password
    • Added NTRIP client init
    • Changed NTRIP server IP address field to support hostnames
    • I/O failure fix due to updated hardware
    • Fixed backup file uploading
    • Syntax fix on the RMS page
    • Fix signal LED no. 1 being always on
    • Reset modem after configuration changes fix
    • DDNS service restart after reboot/interface reload fix
    • Fixed renewing CLI session
    • Fixed setting date on boot
    • sysup fix
    • sodog fix

TRB1450_R_00.01.00 | 2019.02.01

  • Improvements
    • New versioning system

TRB14X_R_00.00.11 | 2019.01.16

  • New features:
    • Added CLI service
    • Added Static Routes page
  • Improvements
    • Added some visual style changes

TRB14X_R_00.00.10 | 2018.12.06

  • New features:
    • First factory firmware
    • Added NTP service
    • Added Dynamic DNS service
    • Added Auto Reboot service
    • Added Input/Output service
    • Added RS232/RS485 services