Difference between revisions of "TSW101 Powering Options"

From Teltonika Networks Wiki
(Created page with "{{Template: networking_tsw1xx_manual_powering_options | name = TSW101 | series = TSW1xx }}")
 
m (Gytispieze moved page Draft:TSW101 Powering Options to TSW101 Powering Options without leaving a redirect)
 
(No difference)

Latest revision as of 09:10, 26 July 2022

Main Page > TSW Switches > TSW101 > TSW101 Manual > TSW101 Powering Options

This chapter contains information on powering options supported by TSW101 switch.

The switch has a 2 pin power socket and can be powered by a 9-30 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:

Power socket

2 pin power socket

No. Description Wire color
TSW200 power socket pinout.png
1 Power Red
2 Ground Black


Disclaimer: TSW101 and Passive PoE devices

There are a couple of options to stay safe when using TSW101 Active PoE with devices that only support Passive PoE:

  • Connect TSW101 and Passive PoE device only via non-PoE Ethernet ports (for example, do not use TSW101 PoE ports with LAN1 ports on Teltonika devices).
  • If there is a need to use LAN1 port on the end device, make sure that TSW101 and the end device are powered from different voltage sources (for example, power both devices from different PSUs, or different batteries).

If TSW101 and a Passive PoE device are connected with common ground, do not use LAN1 port, other ports can be used (refer to image below):

Passive - Active PoE common ground connection.jpg