TSW200 First Start

Main Page > TSW Switches > TSW200 > TSW200 First Start

This Wiki page contains the online version of the Quick Start Guide (QSG) for the TSW200 Switch. Here you will find an overview of the various components found on the front and back sides of a TSW200 switch, basic hardware installation, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TSW200 switch, you can also find a printed version of the Quick Start Guide in the device's package.

TSW200 top front.png

Front view

No. Description
Networking tsw200 manual panels front.png
1 2 pin power socket
2 Power LED
3 LAN LEDs
4 PoE powered Ethernet ports
5 SFP port
6 SFP LEDs

Back view

No. Description
Networking tsw200 manual panels back.png
1 Grounding screw

Connectors

2 pin power socket

No. Description Wire color
TSW200 power socket pinout.png
1 Power Red
2 Ground Black

Ethernet port

No. Action Describtion
Networking tsw100 manual ethernet port LED v2.png
1 Orange LED lit 10/100 Mbps link established
2 Orange LED blinking Active link connection
3 Green LED lit 1000 Mbps link established

SFP port

No. Action Describtion
Networking tsw2xx manual sfp port LED v1.png
1 Down LED lit Lower port link established
2 Down LED blinking Lower port active traffic
3 Up LED lit Upper port link established
4 Up LED blinking Upper port active traffic


Safety information

TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Technical specifications
Input voltage range* 7 - 57 V
Max power consumption 5.5 W
Max PoE power budget at PSE 240 W
Max Ethernet cable length 100 m

* PoE operates properly only when connected power supply outputs 44 V or higher voltage.

PoE standards

This device uses PoE alternative B.

The difference between PoE alternative A and alternative B

Alternative A:

802.3af and 802.3at Alternative A connection. The power sourcing equipment applies a positive voltage to pins 1-2 and a negative voltage to pins 3-6.

802.3af/at Alternative A:
Pins at switch T568A Color T568B Color 10/100 Alternative A, mixed DC & data 1000 (1 gigabit) Alternative A, DC & bi-data
Pin 1 Poe white green stripe.png
white/green stripe
Poe white orange stripe.png
white/orange stripe
Rx + DC + TxRx A + DC +
Pin 2 Poe solid green.png
green solid
Poe solid orange.png
orange solid
Rx − DC + TxRx A − DC +
Pin 3 Poe white orange stripe.png
white/orange stripe
Poe white green stripe.png
white/green stripe
Tx + DC − TxRx B + DC −
Pin 4 Poe solid blue.png
blue solid
Poe solid blue.png
blue solid
Unused Unused TxRx C +
Pin 5 Poe white blue stripe.png
white/blue stripe
Poe white blue stripe.png
white/blue stripe
Unused Unused TxRx C -
Pin 6 Poe solid orange.png
orange solid
Poe solid green.png
green solid
Tx − DC − TxRx B − DC −
Pin 7 Poe white brown stripe.png
white/brown stripe
Poe white brown stripe.png
white/brown stripe
Unused Unused TxRx D +
Pin 8 Poe solid brown.png
brown solid
Poe solid brown.png
brown solid
Unused Unused TxRx D -

Alternative B:

802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4-5 and a negative voltage to pins 7-8.

802.3af/at Alternative B:
Pins at switch T568A Color T568B Color 10/100 Alternative B, DC on spares 1000 (1 gigabit) Alternative B, DC & bi-data
Pin 1 Poe white green stripe.png
white/green stripe
Poe white orange stripe.png
white/orange stripe
Rx + TxRx A +
Pin 2 Poe solid green.png
green solid
Poe solid orange.png
orange solid
Rx − TxRx A −
Pin 3 Poe white orange stripe.png
white/orange stripe
Poe white green stripe.png
white/green stripe
Tx + TxRx B +
Pin 4 Poe solid blue.png
blue solid
Poe solid blue.png
blue solid
DC + TxRx C + DC +
Pin 5 Poe white blue stripe.png
white/blue stripe
Poe white blue stripe.png
white/blue stripe
DC + TxRx C - DC +
Pin 6 Poe solid orange.png
orange solid
Poe solid green.png
green solid
Tx − TxRx B −
Pin 7 Poe white brown stripe.png
white/brown stripe
Poe white brown stripe.png
white/brown stripe
DC − TxRx D + DC −
Pin 8 Poe solid brown.png
brown solid
Poe solid brown.png
brown solid
DC − TxRx D - DC −



日本国内専用です

本製品を電気通信事業者(移動体通信事業者、固定通信事業者、インターネットプロバイダなど)の電気通信回線(または公衆無線LAN)に直接接続することはできません。電気通信事業者の公衆電気通信回線設備に接続する場合は、必ず日本の「電気通信事業法」で認められた機器(ルーター、ゲートウェイ、モデムなど)を介して接続してください。


Qsg rut950 manual.PNGThis sign on the package means that is necessary to read the User's Manual before you start using the device

Qsg rut950 recycle.PNGThis sign on the package means that all used electronic and electric equipment should not be mixed with general household waste


BSMI-RoHS table


TSW200 BSMI RoHS table

To download a PDF version of the TSW200 BSMI RoHS table, click here.