Difference between revisions of "TSW304 Powering Options"
Gytispieze (talk | contribs) (Created page with "{{Template: networking_tsw2xx_manual_powering_options | name = TSW340 | series = TSW3 | poe = 0 }}") |
Gytispieze (talk | contribs) m (Gytispieze moved page Draft:TSW304 Powering Options to TSW304 Powering Options without leaving a redirect) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Template: networking_tsw2xx_manual_powering_options | {{Template: networking_tsw2xx_manual_powering_options | ||
| − | | name = | + | | name = TSW304 |
| series = TSW3 | | series = TSW3 | ||
| poe = 0 | | poe = 0 | ||
}} | }} | ||
Revision as of 09:53, 12 July 2022
Main Page > TSW Switches > TSW304 > TSW304 Manual > TSW304 Powering OptionsThis chapter contains information on powering options supported by TSW304 switch.
The switch has a 2 pin power socket and can be powered by a 7-57 VDC and 9-40 VAC power supply unit (PSU). Refer to the image below for the power socket's pinout information:
Power socket
2 pin power socket
| The power socket is bipolar. |  |
If you decide not to use the standard 50 VDC power supply unit and want to power the device with other voltages (7-57 VDC or 9-40 VAC), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection.
While the device is designed to accept input voltage of up to 57 VDC or 40 VAC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
