Talk:RUT955 Powering Options

From Teltonika Networks Wiki
Revision as of 14:42, 3 May 2018 by Francois (talk | contribs) (Creating Talk:RUT955 Powering Options (modified))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

RUT955 routers can be powered from a power socket or over an Ethernet port. Depending on your network architecture you can use the LAN1 port to power the device.

Powering options rut955.PNG

RUT955 routers can also be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available.

When a RUT955 device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot.

Pin Signal ID T568A Color T568B Color Pins on plug face (socket is reversed)
1 TX+ Poe white green stripe.png
white/green stripe
Poe white orange stripe.png
white/orange stripe
Poe rj45 connector.png
2 TX- Poe solid green.png
green solid
Poe solid orange.png
orange solid
3 RX+ Poe white orange stripe.png
white/orange stripe
Poe white green stripe.png
white/green stripe
4 Poe solid blue.png
blue solid
Poe solid blue.png
blue solid
5 7 - 30 VDC Poe white blue stripe.png
white/blue stripe
Poe white blue stripe.png
white/blue stripe
6 RX- Poe solid orange.png
orange solid
Poe solid green.png
green solid
7 GROUND Poe white brown stripe.png
white/brown stripe
Poe white brown stripe.png
white/brown stripe
8 GROUND Poe solid brown.png
brown solid
Poe solid brown.png
brown solid


Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.