Changes

==Configuration scheme==

==Configuration scheme==

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_topology_v1.png|border|class=tlt-border|1100x1100px]]

[[File:Networking_rutx_configuration_example_l2tp_ipsec_mikrotik_topology_v1.png|border|class=tlt-border|1100x1100px]]

==Mikrotik configuration==

==Mikrotik configuration==

==RUT configuration==

==RUT configuration==

Access RUTXxx WebUI and go to '''Services > VPN > L2TP'''. There create a new configuration by selecting role '''Client'', writing '''New configuration name''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.

Access RUTXxx WebUI and go to '''Services > VPN > L2TP'''. There create a new configuration by selecting role '''Client''', writing '''New configuration name''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.

[[File:Networking_rutx_configuration_example_l2tp_ipsec_mikrotik_3_v1.png|border|class=tlt-border|1100x1100px]]

[[File:Networking_rutx_configuration_example_l2tp_ipsec_mikrotik_3_v1.png|border|class=tlt-border|1100x1100px]]

# Write '''Username''' (write the username which you created with this command /ppp secret add name="username" password="password" service=l2tp profile=ipsec_vpn remote-address=192.168.102.2).

# Write '''Username''' (write the username which you created with this command /ppp secret add name="username" password="password" service=l2tp profile=ipsec_vpn remote-address=192.168.102.2).

# Write '''Password''' (write the password which you created with this command /ppp secret add name="username" password="password" service=l2tp profile=ipsec_vpn remote-address=192.168.102.2).

# Write '''Password''' (write the password which you created with this command /ppp secret add name="username" password="password" service=l2tp profile=ipsec_vpn remote-address=192.168.102.2).

# Press '''Save'''.

# Press '''Save & Apply'''.

Now go to '''Services > VPN > IPsec'''.

Now go to '''Services > VPN > IPsec'''.

# Select '''Encryption algorithm, Authentication''' and '''DH group''' (sellect options that you set with command /ip ipsec proposal set default auth-algorithms=sha1 enc-algorithms=3des pfs-group=modp1024).

# Select '''Encryption algorithm, Authentication''' and '''DH group''' (sellect options that you set with command /ip ipsec proposal set default auth-algorithms=sha1 enc-algorithms=3des pfs-group=modp1024).

# Set all of the settings in '''Phase 2''' to be exactly the same as in the '''Phase 1'''.

# Set all of the settings in '''Phase 2''' to be exactly the same as in the '''Phase 1'''.

# Press '''Save'''.

# Press '''Save & Apply'''.